How do you make a slab edge in Revit?

How do I create a slab edge in Revit?

Add a Floor Slab Edge

1. Click Architecture tab Build panel Floor drop-down (Floor: Slab Edge).
2. Highlight horizontal edges of floors, and click to place a slab edge. …
3. To finish the current slab edge, click Modify | Place Slab Edge tab Placement panel Restart Slab Edge.

Where is slab edge in Revit?

Click Home tab Build panel Floor drop-down Slab Edge. Highlight horizontal edges of floors, and click to place a slab edge. You can also click model lines. As you click edges, Revit Architecture treats this as one continuous slab edge.

What is a slab edge?

Slab Edge System. Our Slab Edge system is a durable and beautiful alternative to a traditional steel I-beam that offers both weight and cost savings in comparison with true steel. This system is suitable for both interior and exterior applications to cover, or give the appearance of, a steel beam.

Why is slab edge thickened?

A thickened-edge slab, also known as a monolithic slab, integrates the footing and the slab in a way that allows all of the concrete to be placed at the same time. The perimeter footing of a thickened-edge slab isn’t very deep.

What is slab edge insulation?

Slab edge insulation keeps heat in or out of a house, depending on the climate and the season. A slab can be insulated with rigid foam, mineral wool, or other rigid insulation rated for below-grade use. The above-grade insulation needs to be protected from UV radiation and impact damage.

Does slab on grade have footings?

STRUCTURAL DESIGN



The major structural components of a slab-on-grade foundation are the floor slab itself and either grade beams or foundation walls with footings at the perimeter of the slab (see Figures 4-2 and 4-3).

What is a slab thickening?

As the name suggests, a slab is a single layer of concrete, several inches thick. The slab is poured thicker at the edges, to form an integral footing; reinforcing rods strengthen the thickened edge. The slab normally rests on a bed of crushed gravel to improve drainage.

How do I create a void slab in Revit?

Create a Void Form

1. On the Create tab Draw panel, select one of the drawing tools.
2. Click in the drawing area, and draw a closed loop that intersects solid geometry.
3. Select the closed loop.
4. Click Modify | Lines tab Form panel Create Form drop-down (Void Form).

How do you create a floor opening cut in Revit?

Cut an Opening in a Floor, Roof, or Ceiling

1. Click By Face or Vertical. Where is it? Architecture tab Opening panel. Structure tab Opening panel. …
2. If you chose By Face, select a face in the floor, ceiling, or roof. If you chose Vertical, select the entire element. Selected face for opening by face. …
3. Click Finish Opening.

How do you edit a slab edge family in Revit?

In the Revit Project Model, select the Slab Edges Tool (Structure Tab – Floors – Slab Edges). Duplicate the current Slab Edge Family in the Type Properties, give it a new name and apply the new Profile Family within the Edit Type Properties Menu. Press Apply and OK.

What is a concrete upstand?

When you are insulating a concrete floor a strip of insulation should be laid vertically around the edge of the room. This vertical strip of insulation is called an upstand.