How do you make a part not fixed in Solidworks assembly?

How do I change the fixed part in a Solidworks assembly?

To change the fix or float, go to featuremanager deign tree. Select and right click on the component’s name for changing the fix or float condition. Select fix or float from the appearing menu as per your requirement. This way you can fix component or float it in solidworks assemebly interface.

How do you make a part flexible in Solidworks assembly?

To make a subassembly flexible: Click a subassembly in the FeatureManager design tree and select Component Properties . In the dialog box, under Solve as, select Flexible, then click OK.

How do you stop collision in Solidworks assembly?

Select Stop at collision to stop the motion of the component when it touches any other entity. The faces that touch the component you are moving are highlighted.

How do you lock a part in place in Solidworks assembly?

Locking and Breaking External References

1. In the FeatureManager design tree: For an individual item, right-click the feature, component, body, or part. …
2. Click External References. …
3. To modify external references, select the external references and click Break Selected, Lock Selected, or Unlock Selected. …
4. Click OK.

Why is my part fixed in assembly solidworks?

It is recommended that at least one assembly component is either fixed, or mated to the assembly planes or origin. This gives a frame of reference for all other mates, and helps prevent unexpected movement of components when mates are added. A fixed component has a (f) before its name in the FeatureManager design tree.

How do you make a part flexible in SolidWorks 2021?

In the FeatureManager design tree, right-click the spring component and click Make Part Flexible in the context menu. In the graphics area, a preview of the unattached reference entity appears. To reattach the reference entity, click a planar face on the model. Click .

Can you make a part flexible in SolidWorks?

You can define a part component as flexible to drive the geometry of flexible components by the assembly geometry.

How do you keep Collision Detection on in Solidworks?

Click Move Component or Rotate Component (Assembly toolbar). In the PropertyManager, under Options, select Collision Detection. If the component you are moving touches any other component in the assembly, the collision is detected.

How do you anchor a part in Solidworks?

To set the anchor points:

1. Expand Sheet Format for the sheet in the FeatureManager design tree.
2. Right-click one of the anchors, select Set Anchor, then click where you want the anchor point on the sheet. When you set the anchor point from the FeatureManager design tree, you are automatically in Edit Sheet Format mode.

What does the lock mate do in Solidworks?

A Lock mate maintains the position and orientation between two components. The components are fully constrained relative to each other. A Lock mate has the same effect as forming a subassembly between the two components and making the subassembly rigid.

How do you lock an angle in Solidworks?

Locking Dimensions

1. In an open sketch, click Smart Dimension. …
2. Click the items to dimension.
3. Move the pointer. …
4. Right-click to lock. …
5. Move the pointer around until the dimension is correctly located.
6. Click to place the dimension.
7. Set the value in the Modify box and click .