How do you make a multibody part in SolidWorks?

How do I create a multibody part in Solidworks?

To save an assembly as a multibody part document:

1. Open an assembly document.
2. Click File > Save As. The Save As dialog box appears.
3. Set the Save as type to Part (*. prt, *. …
4. Select one of the following: Exterior Faces to save the exterior faces as Surface Bodies . …
5. Select or clear the following: …
6. Click Save.

What is a multibody in Solidworks?

A multibody part consists of multiple solid bodies that are not dynamic. If you need to represent dynamic motion among bodies, use an assembly. Tools such as Move Component, Dynamic Clearance, and Collision Detection are available only with assembly documents.

How do you subtract in Solidworks?

To subtract bodies:

1. Click Combine. (Features toolbar) or Insert > Features > Combine.
2. In the PropertyManager, under Operation Type, select Subtract.
3. For Main Body, select the body to keep. …
4. For Bodies to Subtract, select the bodies whose material you want to remove.
5. Click Show Preview to preview the feature.
6. Click .

How do I create an assembly part in Solidworks?

To create an assembly from a part:

1. Click Make Assembly from Part/Assembly (Standard toolbar) or File > Make Assembly from Part. An assembly opens with the Insert Component PropertyManager active.
2. Click in the graphics area to add the part to the assembly. SOLIDWORKS makes the first component fixed.

How do I add a part to a part in Solidworks?

With a part document open, click Insert Part (Features toolbar) or Insert > Part. Browse to a part document and click Open. The Insert Part PropertyManager appears. Under Transfer, select any combination of items from the inserted part to be included in the derived part.

How do I make solid parts in Solidworks?

To convert a boundary surface into a solid, click Insert > Surface > Boundary Surface, and in Options and Preview, click Create solid. To convert a trim-surface feature into a solid, click Insert > Surface > Trim Surface and in Surface Split Options, click Create solid.

How do you isolate a body in Solidworks?

To isolate bodies:

1. Select the bodies to isolate.
2. Click View > Display > Isolate or right-click and select Isolate.
3. On the Isolate pop-up toolbar, you can click one of the following to change the Visibility of Removed Bodies: Transparent. …
4. When you are done working on the isolated bodies, click Exit Isolate.

How do you create a body in Solidworks?

To convert features to bodies and surfaces:

1. Open an assembly file, such as the HousingAssy. …
2. In the FeatureManager design tree, right-click Housing and click Open Part . …
3. At the top of the FeatureManager design tree, right-click Housing and click Convert to Bodies.
4. In the dialog box: …
5. Click Window > HousingAssy.

How do I merge parts in a Solidworks assembly?

To add bodies together:

1. Click Combine. (Features toolbar) or Insert > Features > Combine.
2. In the PropertyManager, under Operation Type, select Add.
3. For Bodies to Combine, select the bodies to combine. You can select bodies in the graphics area or the Solid Bodies. …
4. Click Show Preview to preview the feature.
5. Click .

What is external reference in Solidworks?

An external reference is created when one document is dependent on another document for its solution. If the referenced document changes, the dependent document changes also. In an assembly, you can create an in-context feature on one component that references the geometry of another component.

How do you cut part of a part in Solidworks?

However, you can create a multibody part by using Insert Part to place one part into the other part file. Then you can use Combine on the multibody part. (Features toolbar) or Insert > Features > Combine. In the PropertyManager, under Operation Type, select Subtract.

How do you cut out a part in Solidworks?

Click Cut With Surface on the Features toolbar, or click Insert > Cut > With Surface. In the PropertyManager, under Surface Cut Parameters, select the surface or plane to use to cut the solid bodies. Examine the preview. If necessary, click Flip cut to reverse the direction of the cut.