How do you join a curve in Solidworks?

How do you close a curve in Solidworks?

If you want to close the curve, select the Closed curve check box. icon appears next to the curve name in the FeatureManager design tree.

How do you do a composite curve in Solidworks?

To create a composite curve:

1. Click Composite Curve. on the Curves toolbar, or click Insert > Curve > Composite.
2. Click the items (sketch entities, edges, and so on) that you want to join. …
3. Click .

What is a composite curve?

What are composite curves? Composite curves are T/H diagrams (temperature/heat diagrams) used to visualize cold and hot streams and potential heat transfer between them. It is a graphical technique used for visualizing the heat cascade.

How do you curve an object in Solidworks?

Deform – Curve to Curve Options

1. Click Deform. on the Features toolbar, or click Insert > Features > Deform.
2. In the PropertyManager, under Deform Type, select Curve to curve.

How do you extrude a projected curve in Solidworks?

How do you extrude a curved surface in Solidworks?

1. Click Insert > Surface > Extrude.
2. Select a face:
3. Select other faces to define the extrude as required.
4. Select the end condition.
5. For 3D faces, select a plane, edge, 2D face, or sketch line to define the direction of extrusion .

What does composite curve do in Solidworks?

You can create composite curves by combining curves, sketch geometry, and model edges into a single curve. Use a composite curve as a guide curve when creating a loft or a sweep.

How do you draw a composite curve?

The Composite Curves (T-H diagram) are constructed by dividing the temperature axis into intervals based on the supply (T_S) and target (T_t) temperatures of the process streams, and to add together the enthalpy contributions (hot streams) and requirements (cold streams) in each temperature interval.

How do you show the ribbon in Solidworks?

View Ribbon

1. Click View on the ribbon.
2. Right-click in a drawing view.
3. Use the slider bar at the bottom of the drawing.

What are the key steps of pinch analysis?

Pinch analysis is a methodology for minimising energy consumption of chemical processes by calculating thermodynamically feasible energy targets (or minimum energy consumption) and achieving them by optimising heat recovery systems, energy supply methods and process operating conditions.

What is grand composite curve?

The grand composite curve is a graphical representation of the excess heat available to a process within each temperature interval. In intervals where a net heat surplus exists, we cascade that heat to lower temperature intervals.

How do you curve a rectangle in Solidworks?

In order to round off the corner edges of the rectangle use the Fillet tool also found on the feature tab.

1. Click on the fillet tool.
2. Select the corner edges you want to round off.
3. Define the radius of the fillet (0.25 in)
4. Click the green check mark.

How do I use the freeform tool in Solidworks?

Click Freeform (Features toolbar) or Insert > Features > Freeform. Set the options in the PropertyManager: Select a face to modify. Click to set the Continuity callouts, which control the relation of the modified face to the original face before you modify it (along the selected boundary).