How do you get rid of the yellow lines in Autodesk Inventor?

How do I remove yellow lines in Autocad?

Expand the sketch browser node and you will find a Projected Loop underneath. You can right-click on this Projected Loop browser node and select delete.

How do I get rid of the grid line in Inventor?

Display or hide sketch grid

1. Click File Options to open the Application Options dialog box.
2. On the Sketch tab, in Display, clear the check box to hide, or select to display Grid Lines, Minor Grid Lines, Axes, or coordinate system indicator. …
3. To turn snap On or Off, clear or select the check box for Snap to Grid.

How do I turn off Origin indicator in Inventor?

You can hide an origin indicator after it is placed, but you cannot delete it. Tip: Place the origin indicator on the view where it is easily located and makes sense for all holes, such as a corner of a plate or other easily located place.

How can you remove unwanted lines on a drawing?

Removing Unwanted Lines from your Autodesk Inventor Sketch

1. Go to sketch tab.
2. Select Trim.
3. Click on the lines that you want to remove.

How do you delete extra lines in AutoCAD?

Select objects in a drawing (use CTRL-A to select everything) and then type OVERKILL on the command line. Click OK on the Delete Duplicate Objects dialog window, adjusting settings as desired (the default options are usually sufficient). Overkill deletes information that is overlaying other items.

How do I turn off the grid in Solidworks sketch?

Click Grid/Snap (Sketch toolbar) or click Options and on the Document Properties tab, select Grid/Snap. Turns the sketch grid on or off.

How do I show grid in Autodesk?

To Display a Grid and Set the Grid Spacing

1. On the Status Bar, right-click on grid display Find and select Grid Settings. …
2. In the Drafting Settings dialog box, Snap and Grid tab, click Grid On.
3. Under Snap Type, make sure Grid Snap and Rectangular Snap are selected.

How do I show origin indicator in Inventor?

Assuming this is concerning ordinate dimensions you can right-click on one of the ordinate dimensions and deselect Hide Origin Indicator. I hope this helps. And if related to a Hole table, right click the hole table and under the “visibility” flyout select “origin”. Thank you Curtis.

How do I move origin in Inventor?

Click the origin indicator and drag it to the desired location. To precisely move the origin to a new location, right-click the origin indicator and choose Edit, or double-click the indicator. In the Origin Indicator dialog box, enter Relative X and Y offset values.

How do you use ordinate dimension in Inventor?

Add ordinate dimensions

1. On the ribbon, click Annotate tab Dimension panel Ordinate .
2. In the graphics window, select the view to dimension.
3. Place the origin indicator.
4. Select the geometry to dimension in the graphics window.
5. Right-click and select Continue.
6. Move the cursor to preview placement of the dimensions.

How do I clean my inventor?

Select Inventor (or any other related components).

…

1. Run Windows programs > Autodesk > Uninstall Tool.
2. Select Inventor from the list. All related components are automatically selected.
3. Click Uninstall.

How do you make something clear in Inventor?

Solution:

1. Open Application Options.
2. Go to Display tab.
3. Under Inactive Component Appearance, change % opaque. See Display Tab Reference (Application Options).