How do you flip Smart Fasteners in solidworks?

Where is Smart fasteners in SolidWorks?

Smart Fasteners are added based on the Files options in the SOLIDWORKS Toolbox – User Settings dialog box. You can add fasteners to an assembly as a configuration of an existing part or as a copy of an existing part.

How do I use a toolbox in Solidworks?

Welcome to Toolbox Setup

1. In SOLIDWORKS, click Tools > Options > Hole Wizard/Toolbox > Configure .
2. From Windows, click Start > All Programs > SOLIDWORKS version > SOLIDWORKS Tools > Toolbox Settings .
3. When Toolbox is loaded and a document is open in SOLIDWORKS, click Toolbox > Configure.

How do I install a toolbox in Solidworks?

From the SOLIDWORKS menu, click Tools > Add-Ins . In the Add-Ins dialog box, under Active Add-ins and Start Up, select SOLIDWORKS Toolbox Utilities, SOLIDWORKS Toolbox Library, or both. You can also activate the SOLIDWORKS Toolbox Library add-in by clicking Add in now in the Toolbox Design Library task pane. Click OK.

What is Toolbox in SolidWorks?

The Toolbox is a collection of several powerful tools built into SolidWorks; it can increase productivity and decrease the time required to complete a design. The Toolbox contains a vast library of standard hardware components that can easily be dropped into a design at any point.

How do you add multiple fasteners in SolidWorks?

Under Part/Assembly to Insert, do one of the following:

1. Ctrl + select several components from the list.
2. Click Browse. In the dialog box, Ctrl + select several components and then click Open.

How do I create a smart component in SolidWorks?

To make a component smart:

1. Create an assembly containing: …
2. Position the components and apply mates.
3. Click Make Smart Component (Assemblies toolbar) or click Tools > Make Smart Component.
4. Set options in the Smart Component PropertyManager.

How do you change Toolbox parts in SOLIDWORKS?

To replace Toolbox components:

1. In the FeatureManager design tree, select the components to replace.
2. Right-click and click Edit Toolbox Component.
3. In the PropertyManager, under Replace Component, click Change Fastener Type.
4. In the dialog box, select the replacement component and click OK.

How can you change the size of a toolbox screw in an assembly SOLIDWORKS?

If you open an assembly with the wrong sizes, right-click a component and select Edit the Toolbox components and choose the correct sizes for one of each of the incorrectly sized types of hardware.

How do you fix a toolbox in SOLIDWORKS?

Open the Control Panel and find Programs and Features. The installation manager will open showing options for what can be changed about SOLIDWORKS. Choose Repair your installation. Proceed through the Next windows and repair the installation of SOLIDWORKS.

How do you screw something in Solidworks?

Screw Mate

1. Click Mate (Assembly toolbar) or Insert > Mate.
2. In the PropertyManager, under Mechanical Mates, click Screw .
3. Under Mate Selections, select the rotation axes on the two components for Entities to Mate .
4. Under Mechanical Mates: Option. Description. Revolutions/ length_unit. …
5. Click .

How do you make threaded screws in Solidworks?

Creating a Cut Thread

1. Open a part file. The diameter of the cylinder is 6mm. …
2. Click Insert > Features > Thread .
3. In the graphics area, select the top edge of the cylinder.
4. In the PropertyManager, under Specification: …
5. Under Thread Location: …
6. Under End Condition, click Maintain Thread Length. …
7. Click .