How do you find the plumbing layout of my house?

Are house blueprints public record?

Once the blueprints have been filed by the contractor with the municipality building department, these building plans are public records and technically attainable by anyone wanting to view them. … In situations like those, the blueprints of the original structure are necessary.

How do I check the plumbing in my house?

1. Faucets, Sinks and Toilets

1. Turn on each faucet in the house.
2. See that the water drains quickly from each sink.
3. Check for leaks beneath and around the faucet and below the sink.
4. Flush every toilet to see if all the water drains out.
5. Look around the base of the toilet and water chamber for leakage.

How do I find the original plans for my house?

There are several people and places you can turn to for help finding original blueprints for your home:

1. Contact sales agents at your real estate office.
2. Visit neighbors with similar homes.
3. Consult local inspectors, assessors, and other building officials.
4. Examine fire insurance maps for your neighborhood.

What are the plumbing systems in a typical house?

Several different systems make up a house’s plumbing. Fresh water is delivered to a home through water supply pipes from the utility or a well and is then distributed to sinks, toilets, washers, bathtubs, and related fixtures. The drain-waste-vent system carries away used water and wastes to sewers or septic tanks.

How do I get blueprints to my house?

There are a few basic steps to creating a floor plan:

1. Choose an area. Determine the area to be drawn. …
2. Take measurements. If the building exists, measure the walls, doors, and pertinent furniture so that the floor plan will be accurate. …
3. Draw walls. …
4. Add architectural features. …
5. Add furniture.

Do blueprints show plumbing?

Do the plans/blueprints include plumbing and electrical? … The rough plumbing is included on the plans showing the kitchen and bath fixture symbols and their locations. However, the location of where the pipes come into the house is site specific and not included on the plans.

How do I know if my plumbing is bad?

Here are some of the common symptoms to tell if your pipes are bad somewhere in the depths of your plumbing system:

1. Sign #1: Odd sounds coming from the faucets. …
2. Sign #2: Low water pressure. …
3. Sign #3: Unpleasant smells coming from the drains. …
4. Sign #4: Sluggish drains. …
5. Sign #5: Stains or damaged walls.

Do Home Inspectors check pipes?

The inspector will look at the plumbing system inside and outside of the house. This includes the sinks, toilets, bathtubs and outdoor spigots. … He will also look for any leaks around plumbing pipes and fixtures. The inspector will check any installed systems inside the house.

How do I know if my plumbing is working?

Vital Points in Performing Plumbing Inspection

1. Shut the main water supply. Visually inspect the shut-off valve of the main water supply for defects and damages. …
2. Ensure the plumbing system is watertight. …
3. Conduct water piping pressure test. …
4. Check the sewer and drainage lines. …
5. Examine fixtures, supply lines, and drains.

How much does it cost to have house plans drawn?

The average cost of drawing and drafting services is approximately $50/hr. Depending on the complexity of the work, prices can range from as low as $48/hr to as high as $60.75/hr.

Are older houses built better?

Old homes have better-quality construction

Even the walls are likely different. In an older home they’re probably built with plaster and lathe, making them structurally stronger than the drywall construction of modern homes. These older materials also provide a better sound barrier and insulation.

What are the basics of plumbing?

Plumbing Basics: Components of the Drain Water Vent System

• Drain Pipes. These are downward angled pipes that rely on gravity to move water from the fixture and into the sewer line. …
• Drain Traps. Drain traps, also called P traps, are U-shaped pipes that prevent backflow in a plumbing system. …
• Drain Vent.

Are kitchen and bathroom pipes connected?

Tuesday, January 9th, 2018. Your kitchen sink and bathtub have separate drain lines, but they ultimately all connect to a single line that leads into the sewer. … It is important to know how your plumbing drains work and how your sink backs up into your bathtub before the problem happens.

What are the different types of plumbing systems?

Below are the most commonly used types of plumbing pipes, their purposes and advantages:

• PVC or Polyvinyl Chloride Pipe. …
• Rigid Copper Pipe. …
• PEX or Cross-linked Polyethylene Piping. …
• Stainless Steel Pipes. …
• Cast Iron Plumbing Pipes.