How do you extrude a boss in Solidworks?

How do you extrude in Solidworks?

Extruding Surfaces from a 2D or 3D Face

1. Click Insert > Surface > Extrude.
2. Select a face: …
3. Select other faces to define the extrude as required. …
4. Select the end condition.
5. For 3D faces, select a plane, edge, 2D face, or sketch line to define the direction of extrusion .

What is extrude boss?

Extrude tool is used to extend a sketched profile in one or two directions as either a thin feature or a solid feature. An extrude operation can either add material to a part (in a base or boss) or remove material from a part.

What is extrude boss base in Solidworks?

The Boss-Extrude/Base feature will project a 3D model with the selected sketch or face. Figure 3: Selecting a Plane. Using the 2D sketch or plane to create a 3D model, the Boss-Extrude feature button will prompt you to set parameters in the menu shown in Figure 4.

How do you edit a extrude boss in Solidworks?

If you enter the wrong distance to extrude to: and exit the boss-extrude dialog without correcting it, go to the design tree, right-click on the extrude name, and find the “edit feature” button in the box of options that appears above the mouse. The dialog will reopen and you can edit the properties of the extrude.

What is extrude command in Solidworks?

Using the SOLIDWORKS Surface Extrude feature, we can extrude the boundary edges of a face of a solid body or edges of a surface body in a customized direction. When we run the Extruded Surface command, two things can happen: Either a sketch is active or preselected or no sketches exists.

What is a boss in Solidworks?

One of the oldest commands in the SOLIDWORKS software is the boss/base extrude command. An Extruded Boss/Base feature will allow you to take a 2D sketch and add thickness to it in the third dimension. Every few releases, this feature gets some terrific functionality added to it.

What does extruded cut do in Solidworks?

The Cut-Extrude feature will then preview the shape of cut based on the selected sketch. The Cut-Extrude feature button will prompt you to set parameters in the menu shown in Figure 6.

How do you extrude boss bases?

Extrude PropertyManager

1. Create a sketch.
2. Click one of the extrude tools: Extruded Boss/Base. on the Features toolbar, or click Insert > Boss/Base > Extrude. Extruded Cut. on the Features toolbar, or click Insert > Cut > Extrude. Extruded Surface. on the Surfaces toolbar, or click Insert > Surface > Extrude.

How do you extrude the boss base in assembly in SolidWorks?

Creating Extruded or Revolved Cuts as Assembly Features

1. Open a sketch on a face or plane, and sketch a profile of the cut. …
2. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve.
3. Set the options as needed in the Extrude or Revolve PropertyManager.

How do I change the extrusion dimension in Solidworks?

To change the geometry of a boss-extrusion you should either:

1. RMB – EDIT FEATURE.
2. RMB – EDIT SKETCH. or.
3. Double click on the feature. The dimensions show up. Double click on each dimension to change.

How do you move a cut Extrude in Solidworks?

To move more than one feature at a time, hold down Ctrl as you select the features.

…

To move a feature to a new place on a model:

1. Select Instant3D (Features toolbar).
2. In the graphics area, select the feature to move.
3. Use the handles to drag the feature to its new location.

How do I change the Extrude size in Solidworks?

Double click the (extruded, revolved, etc.) part, then change the dimensions that’ll appear. 2. Click on the arrow before the (extrusion, revolve, etc.)