How do you edit a feature line in Civil 3d?

How do I change a feature line in Civil 3d?

To Edit Feature Line Site Properties

1. In Toolspace, on the Prospector tab, expand the site collection right-click Feature Lines and click Properties.
2. Click the Options tab. …
3. Select the Filter Unused Styles check box to show only used styles.

Can you trim a feature line in Civil 3d?

Click Modify tab Edit Geometry panel Trim Find. Select the objects to serve as cutting edges. Select the feature line(s) to trim.

How do I change my feature line elevation?

Click Modify tab Edit Elevations panel Edit Elevations Find. Select the feature line or other object. To select the vertex or elevation point to edit, press Enter without entering a value. You can also enter Next or Previous to change the direction the command uses to step through the points.

How do you remove a curve from a feature line in Civil 3d?

Use the Edit Curve command to edit the radius of feature line (or survey figure) arcs.

…

To Edit Feature Line Curves

1. Click Modify tab Edit Geometry panel Edit Curve Find.
2. Select the curve to edit. …
3. In the Edit Feature Line Curve dialog box, edit the curve.

How do you add a feature line?

Exercise 1: Creating Feature Lines

1. Click Home tab Draw panel Create Line Find. …
2. Click Home tab Create Design panel Feature Line drop-down Create Feature Lines From Objects Find.
3. Click both lines, then right-click and click Enter to end the selection. …
4. In the Create Feature Lines dialog box, click OK.

How do I add a feature line to a surface in Civil 3d?

To Add a Feature Line to a Surface as a Breakline

1. Right-click a feature line Add To Surface As Breakline. Note: If there are no surfaces in the drawing, you are prompted to create one.
2. In the Select Surface dialog box, select a surface, and click OK. …
3. In the Add Breaklines dialog box, specify the breakline options.

Can you extend a feature line?

The extend tool will not cause the elevation to drop to match the target elevation. The slope will be maintained as it extends to the new location. Thus if a featureline has a plus 1% slope and you extend it to an object 100′ away, the new elevation will be 1′ higher.

What occurs if two feature lines occupy the same site and intersect?

Feature lines in the same site can only have one elevation at a crossing point. If two feature lines approach within a tolerance distance of 0.0001, the points collapse to a single point.

How do you delete a point on a feature line?

To Delete a Feature Line Elevation Point

1. Click Modify tab Edit Elevations panel Delete Elevation Point Find.
2. Select the feature line or other object.
3. Click to select the elevation point to delete. Or enter All to delete all elevation points.

How do you create a 3D polyline with elevations from points in Civil 3D?

Solution:

1. Start 3D polyline command (command: “3DPOLY”)
2. While still in command type ‘PO (“Point Object” transparent command) in command-line. …
3. Click the first point and then on any subsequent points to create the desired line.
4. Hit Enter key.

What are feature lines in Civil 3D?

Feature lines are 3D objects which can be used as grading footprints, surface breaklines, and as corridor baselines. About the Feature Lines Collection (Prospector Tab) Use the Feature Lines collection in the Prospector tree to manage feature line styles and layers.