How do you draft a face in Solidworks?

How do I draft a part in Solidworks?

Parting Line Draft

1. Sketch the part to be drafted.
2. Insert a split line curve, if desired.
3. Click Draft on the Features toolbar or click Insert > Features > Draft.
4. Under Type of Draft, select Parting Line. …
5. Under Draft Angle, enter the Draft angle .

Can you draft in Solidworks?

To add a draft, select the Features tab and then Draft in the CommandManager. Using the Draft tool, simply select a reference plane (I chose the same plane that we used for the analysis) and then the faces to draft.

What is step draft?

A step draft is a variation of a parting line draft. The step draft creates one face rotated about the plane used as the Direction of Pull. This results in small faces, representing the steps (highlighted in blue in the example below).

How do you draw in Solidworks?

Creating a New Drawing



(Standard toolbar) or File > New. In the New SOLIDWORKS Document dialog box, select Drawing , then click OK. Select options for Sheet Format/Size, then click OK. In the Model View PropertyManager, select a model from Open documents or browse to a part or assembly file.

How do you rib in Solidworks?

To create a rib:

1. Sketch the contour to use as the rib feature on a plane that intersects the part, or is parallel or at an angle to an existing plane.
2. Click Rib (Features toolbar) or Insert > Features > Rib.
3. Set the PropertyManager options.
4. Click OK .

How do you change the draft angle in Solidworks?

Changing Draft Using DraftXpert

1. In the DraftXpert PropertyManager, select the Change tab.
2. Under Drafts to Change, select the draft items to modify for Faces to Draft . …
3. Set a value for Draft Angle and click Change to modify the draft for the selected faces.

What is the application of draft feature?

About the Draft Feature. The Draft feature adds a draft angle from -89.9° to +89.9° to individual surfaces or to a series of surfaces. You can draft only the surfaces that are formed by tabulated cylinders or planes. To access the Draft feature, click Model > Draft.

What is loft in Solidworks?

Loft creates a feature by making transitions between profiles. A loft can be a base, boss, cut, or surface. You create a loft using two or more profiles. Only the first, last, or first and last profiles can be points.

What is a draft angle in Solidworks?

Draft tapers faces using a specified angle to selected faces in the model. One application is to make a molded part easier to remove from the mold. You can insert a draft in an existing part or draft while extruding a feature. You can apply draft to solid or surface models.

What is neutral plane in Solidworks?

You can create a feature that tapers selected model faces by a specified angle, using a Neutral Plane to determine the direction of pull for creating molds. You can also use the DraftXpert to create, change, or remove neutral plane drafts.

How do you dimension a draft?

There are several ways to invoke the command:

1. Press the. Draft Dimension button.
2. Select the Annotation → Dimension option from the menu.
3. Use the keyboard shortcut: D then I.

How is draft angle measured?

You can measure the draft angle of positions within a surface patch by holding down the Shift key. The draft angle is measured from the principle plane to the normal of the point on the surface under the cursor. Click the position on the surface to enter the draft angle into the expressions box.