How do you delete a extruded part in Solidworks?

How do you delete part of a part in Solidworks?

To delete a component from an assembly:

1. Click the component in the graphics area or in the FeatureManager design tree.
2. Press the Delete key, click Edit > Delete, or right-click and select Delete.
3. Click Yes to confirm the deletion.

How do you extrude and remove materials in Solidworks?

Extrude PropertyManager

1. Create a sketch.
2. Click one of the extrude tools: Extruded Boss/Base. on the Features toolbar, or click Insert > Boss/Base > Extrude. Extruded Cut. on the Features toolbar, or click Insert > Cut > Extrude. Extruded Surface. on the Surfaces toolbar, or click Insert > Surface > Extrude.

How do you cut an extruded part in Solidworks?

To create an assembly feature cut:

1. Open a sketch on a face or plane, and sketch a profile of the cut. …
2. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve.
3. Set the options as needed in the Cut-Extrude or Cut-Revolve PropertyManager.

How do you edit an extrusion in Solidworks?

If you enter the wrong distance to extrude to: and exit the boss-extrude dialog without correcting it, go to the design tree, right-click on the extrude name, and find the “edit feature” button in the box of options that appears above the mouse. The dialog will reopen and you can edit the properties of the extrude.

How do you delete intersecting parts in Solidworks?

In the PropertyManager, click Intersect. The features you can remove appear in the Regions to Exclude list. Select Region 1, Region 3, and Region 5. The regions you select are not included as added geometry.

Can you mirror an extruded cut in Solidworks?

Mirroring can also be used on more than just part bodies, it can be used on smaller extruded features, cuts, and various shapes that appear symmetrically throughout the part.

How do you delete a material in Solidworks?

To remove a material from a part: In a part document, right-click Material in the FeatureManager design tree and select Remove Material. Search ‘Removing a Material’ in the SOLIDWORKS Knowledge Base.

What does extruded cut do in Solidworks?

The Cut-Extrude feature will then preview the shape of cut based on the selected sketch. The Cut-Extrude feature button will prompt you to set parameters in the menu shown in Figure 6.

How do you trim a surface in SolidWorks?

To trim a surface: Create two or more surfaces that intersect at one or more points, or create a surface that intersects with a plane or has a sketch on its face. Click Trim Surface on the Surfaces toolbar, or click Insert > Surface > Trim.

How do I change the extrusion dimension in Solidworks?

To change the geometry of a boss-extrusion you should either:

1. RMB – EDIT FEATURE.
2. RMB – EDIT SKETCH. or.
3. Double click on the feature. The dimensions show up. Double click on each dimension to change.

How do I change the extrusion depth in Solidworks?

To change the depth of the feature, type a new value in the Depth box, or use the arrows to change the value. Modify Draft. To remove drafts from the feature, select the Modify Draft check box. Make sure the Extrude with Draft check box is cleared.

How do I edit a shape in Solidworks?

Click Edit > Definition. Right-click a feature in the FeatureManager design tree or the graphics area and select Edit Feature from the context toolbar.