How do you define a straight slot in SolidWorks?

How do you create a slot dimension in Solidworks?

Click Options (Standard toolbar). Select Detailing from the Document Properties tab. Under Auto insert on view creation, select Center marks – slots -part or Center marks – slots -assembly and click OK.

How do you make a curved slot in Solidworks?

In a sketch, click 3 Point Arc Slot (Sketch toolbar) or Tools > Sketch Entities > 3 Point Arc Slot . Click to specify the starting point of the arc. Move the pointer to specify the ending point of the arc and then click. Move the pointer to specify the third point for the arc and then click.

How do you write slot dimensions?

Slots are dimensioned by giving their overall dimensions. Or, by giving the overall width and the distance between centers.

How do you annotate a slot in Solidworks?

Manually Placing Sketch Slot Center Marks

1. Click Center Mark (Annotations toolbar).
2. Under Manual Insert Options, select Slot center mark.
3. Select other options for the center mark type.
4. In the graphics area, select an arc or curved edge of a slot and click .

How do you use slot mate in Solidworks?

Slot Mates

1. Click Mate (Assembly toolbar) or Insert > Mate.
2. In the PropertyManager, expand Mechanical Mates and select Slot .
3. For Mate Selections, select a slot face and the feature to mate to it: The face of another straight or angular slot. An axis. …
4. Select a constraint option: Option. Description. …
5. Click .

How do you mate cams in Solidworks?

To add a cam-follower mate:

1. Click Mate (Assembly toolbar) or Insert > Mate.
2. In the PropertyManager, on the Mechanical tab, click Cam .
3. Under Mate Selections, for Entities to Mate , select a face on the cam. …
4. Click in Cam follower and select a face or vertex on the cam follower.
5. Click .

How are angled surfaces dimensioned?

Angled surface may be dimensioned using coordinate method to specify the two location distances of the angle. Angled surfaces may also be dimensioned using the angular method by specifying one location for distance and the angle. Arcs and circles are dimensioned in views that show the arc or circle.

How do you indicate reference dimensions?

The method for identifying a reference dimension (or reference data) on drawings is to enclose the dimension (or data) within parentheses.

What is the difference between dimensions and tolerances?

Tolerance is the total amount a dimension may vary and is the difference between the maximum and minimum limits, Because it is impossible to make everything to an exact size, tolerances are used on production drawings To control the manufacturing process more accurately and to control the variation between mating parts …

How do you make a slotted hole in Solidworks?

To create a Hole Wizard slot for a part:

1. Select a face and click Hole Wizard (Features toolbar) or Insert > Features > Hole > Wizard.
2. In the PropertyManager, on the Type tab, for Hole Type, select a slot type: Option. Description. …
3. Under Hole Specifications, for Slot length. , enter a value.
4. Select other options and click .

How do you dimension slots in Inventor?

Start the dimension command and select one of the arcs. Then move your mouse around the second arc – near a quadrant you should get a special dimensional symbol. If you click on th arc why this special glyph is displayed it will give you the slot length dimension.