How do you cut a hole in Revit?

How do you cut in Revit?

Open the Revit family with unattached voids and click Create tab Properties panel Family Category and Parameters. In the Family Category and Parameters dialog, select Cut With Voids when Loaded and click OK. Load the family into the project and place it. Click Modify tab Geometry panel Cut drop-down (Cut Geometry).

How do you create holes in Revit?

To place holes

1. Click Steel tab Fabrication Elements panel (Holes).
2. Select the element face to which the hole pattern will be perpendicular.
3. Click Modify | Create Hole Pattern tab Draw panel and select either: …
4. Sketch the shape of the hole pattern on the element face.

How do you use voids in Revit?

Create negative geometry (voids) to cut solid geometry with the Create Void tool.

1. On the Create tab Draw panel, select one of the drawing tools.
2. Click in the drawing area, and draw a closed loop that intersects solid geometry.
3. Select the closed loop.
4. Click Modify | Lines tab Form panel Create Form drop-down (Void Form).

How do you cut extrusions in Revit?

Solution:

1. Edit the in place wall.
2. Create a new void extrusion that will define the opening.
3. Use the “Cut” tool and select the void geometry.
4. Finish the solid edition.

How do I create a slab opening in Revit?

Add an Opening in a Structural Floor

1. On the ribbon, click Opening By Face. Where is it? …
2. Select a structural floor.
3. Using the sketch tools on the Modify | Create Opening Boundary tab Draw panel, sketch the structural floor opening.
4. When finished, click Modify | Create Opening Boundary tab Mode panel Finish Edit Mode.

How do you select a floor in Revit?

In a plan view, select the floor, and click Modify | Floors tab Mode panel Edit Boundary. Watch the tooltip and the status bar to be sure you select the floor, not another element. If desired, you can use a filter to select the floor.

How do I edit a floor in Revit?

Edit a Floor Sketch

1. In a plan view, select the floor, and click Modify | Floors tab Mode panel Edit Boundary. Watch the tooltip and the status bar to be sure you select the floor, not another element. …
2. Use sketching tools to change the boundaries of the floor.
3. Click Finish Edit Mode.