How do you create a plan view in Revit?

What are plan views in Revit?

Two-dimensional views provide a traditional method for viewing a model. These views include floor plans, reflected ceiling plans, and structural plans. Most models include at least one floor plan.

How do you create a site plan view?

Create the Site Plan

1. Define site settings. …
2. Create the toposurface. …
3. Rotate the project to True North. …
4. Specify property lines. …
5. Add a building pad. …
6. Grade the toposurface. …
7. Create parking lots, roads, and sidewalks. …
8. Add site components.

How do I create a site plan in Revit 2021?

Create the Site Plan

1. Define site settings. …
2. Create the toposurface. …
3. Rotate the project to True North. …
4. Specify property lines. …
5. Add a building pad. …
6. Grade the toposurface. …
7. Create parking lots, roads, and sidewalks. …
8. Add site components.

How do you edit a floor plan view in Revit?

Edit a Floor Sketch

1. In a plan view, select the floor, and click Modify | Floors tab Mode panel Edit Boundary. Watch the tooltip and the status bar to be sure you select the floor, not another element. …
2. Use sketching tools to change the boundaries of the floor.
3. Click Finish Edit Mode.

How do I get site plan view in Revit?

Open the Site view. Click View tab Graphics panel View Templates drop-down (Apply Template Properties to Current View). In the Apply View Template dialog, under View Templates, select Site Plan. Note: If there is not a template for a site plan, you will need to set the View Properties manually.

How do you dimension a site plan in Revit?

in Siite Plan View, select Subregion >Edit Boundary >enter in Sketch Mode and put Dimensions. still in Sketch Mode select the sketch and the dimensions > Clipboard – Copy. exit from Sketch Mode. Paste> Aligned to Current View.

How do you change the associated level of a plan in Revit?

Make a new view assigned to the correct level (View Menu > New > Floor or Ceiling Plan or use the View Design Bar). The others can be deleted. If you need to keep any annotation in one of the views you want to discard you can cut them to clipboard and then paste them in to the good view.

How do you create a floor plan level in Revit?

Add Levels

1. Open the section or elevation view to add levels to.
2. On the ribbon, click (Level). Architecture tab Datum panel (Level) …
3. Place the cursor in the drawing area and click. …
4. Draw level lines by moving the cursor horizontally. …
5. Click when the level line is the correct length.

How do you make a lower level visible in Revit?

Solution:

1. In plan view, click View menu > View Properties.
2. Click the Edit button for the View Range parameter.
3. Enter a value for both the Bottom Offset, under Primary Range, and the Level Offset, under View Depth, that is more than 4 feet from the floor or slab.