How do you create a new plane in Solidworks?

How do you make a new plane in Solidworks?

Adding planes to SOLIDWORKS is achieved using the Plane Wizard. The Plane Wizard can be accessed via Features > Reference Geometry > Plane on the command manager, or via Insert > Reference Geometry > Plane from the drop down menu. Up to three references can be selected in order to define a new plane.

How do I create a new plane in Solidworks 2021?

Creating Planes

1. Click Plane (Reference Geometry toolbar) or Insert > Reference Geometry > Plane .
2. In the PropertyManager, select an entity for First Reference . …
3. Select a Second Reference and Third Reference as necessary to define the plane. …
4. Click .

How do you create an offset plane in Solidworks?

To create an offset plane, select the Reference Geometry drop down on the CommandManager and choose the Plane option. Once the option to create a plane is open, select a face or another plane and set a distance for the offset.

How do you make a tangent plane in SolidWorks?

When you click on a non planar face using the reference geometry>plane option, you can create a tangent plane. This tangent plane will be placed arbitrarily until a second reference is selected. By using a sketch point, these planes can be easily positioned in the desired orientation.

What is a plane in SOLIDWORKS?

SolidWorks provides Front, Top, and Right planes as defaults. The orientations (Front, Top, Right, and so on) relate to these planes. Planes are used for sketching and for creating geometry for features.

How do you mate a part to a plane in SOLIDWORKS?

To add a symmetry mate:

1. Click Mate (Assembly toolbar) or Insert > Mate.
2. Under Advanced Mates, click Symmetric .
3. Under Mate Selections: Select the plane for Symmetry Plane. Click in Entities to Mate and then select the two entities to be symmetric.
4. Click .

What are the basic planes available in SOLIDWORKS?

By now we are all familiar with using the default Reference Planes (Front, Top & Right) within SOLIDWORKS.

How do you make a reference plane?

Use the Line tool or the Pick Line tool to draw a reference plane.

1. On the ribbon, click (Reference Plane). Architecture tab Work Plane panel (Reference Plane) Structure tab Work Plane panel (Reference Plane) …
2. To draw a line: On the Draw panel, click (Line). …
3. To pick an existing line: On the Draw panel, click (Pick Lines).