How do you create a midpoint relationship in Solidworks?

How do you create a midpoint in Solidworks?

Dimensioning to Midpoints

1. Click Smart Dimension. on the Dimensions/Relations toolbar, or click Tools > Dimensions > Smart.
2. Right-click the edge whose midpoint you want to dimension, and click Select Midpoint.
3. Select the second entity to dimension.
4. Use rapid dimensioning to place evenly spaced dimensions.

How do you create a relationship between parts in Solidworks?

To create a part within an assembly:

1. Click New Part (Assembly toolbar) or Insert > Component > New Part.
2. For externally saved parts, type a name for the new part in the Save As dialog box and click Save.
3. Select a plane or planar face (while the pointer is ).

How do you coincide two points in Solidworks?

How to Add a Coincident in SolidWorks

1. Select a line, point, center line or temporary axis with the left mouse button. …
2. Hold the “Control” key and select the second line, point or temporary axis by left-clicking it. …
3. Click the “Coincident” button in the Add Relations section of the properties box.

How do you create a parallel relation in Solidworks?

To add parallel dimensions to a drawing:

1. Click Smart Dimension. (Dimensions/Relations toolbar) or Tools > Dimensions > Smart.
2. Click the geometry to dimension.
3. Use rapid dimensioning to place evenly spaced dimensions. Alternatively, move the pointer outside of the rapid dimension selector to place the dimension.

What is dynamic highlight in Solidworks?

Items in the graphics area are highlighted when you select them, or dynamically highlighted when you move the pointer over them.

How can you create relationship between parts within an assembly?

To create a part within an assembly:

1. Click New Part (Assembly toolbar) or Insert > Component > New Part.
2. For externally saved parts, type a name for the new part in the Save As dialog box and click Save.
3. Select a plane or planar face (while the pointer is ).

How do I add parts to assembly in Solidworks?

Right-click the component and click Insert Into Assembly. You can populate one or more holes in the assembly by preselecting the circular edges of the holes and then using Insert Into Assembly. If you do not preselect a hole, the part is placed at the assembly origin.

How do you create a Pierce relationship in SolidWorks?

I will need to select two entities (you can do this by holding down the CTRL key). Let’s select the point and the curve shown below. After selecting them, you’ll be given some relationship options on the left side of the screen under Properties. Select Pierce.

What does collinear mean in SolidWorks?

Collinear. Two or more lines. The items lie on the same infinite line. Coradial. Two or more arcs.

How do I make two points horizontal in Solidworks?

Creating Horizontal Dimensions

1. In an open sketch, click Horizontal Dimension. (Dimensions/Relations toolbar) or Tools > Dimensions > Horizontal. …
2. Select the two entities to dimension. You can undo previous selections by pressing Esc. …
3. Set the value in the Modify box and click .
4. Click a location to place the dimension.

How do you join lines in Solidworks?

To combine two split sketch entities into one: In an open sketch, click the split point and press Delete. Search ‘Combining Split Entities’ in the SOLIDWORKS Knowledge Base.