How do you create a broken out view in SolidWorks?

How do I create a partial section view in SolidWorks?

Creating a Section View Manually

1. Click Section View. (Drawing toolbar), or Insert > Drawing View > Section. …
2. To create a section view manually, click Edit sketch to display the Insert Line PropertyManager.
3. Sketch a section line. …
4. Click to place the view.

How do you edit a broken-out in SolidWorks?

To delete or edit a broken-out section:

1. Right-click the broken-out section in the FeatureManager design tree and select one of the following.
2. Delete.
3. Edit Definition. Set options in the Broken-out Section PropertyManager , then click OK .
4. Edit Sketch. Select the sketch entity and edit it, then close the sketch.

How do you break an isometric view in SolidWorks?

Model Break Views Within Drawings

1. In the Drawing View PropertyManager, under Reference Configuration, select Show in exploded or model break state.
2. Right-click the drawing view and click Properties. In the dialog box, in Configuration information, select Show in exploded or model break state, and click OK.

What is an auxiliary view in SolidWorks?

An Auxiliary View is similar to a Projected View, but it is unfolded normal to a reference edge in an existing view. You can create an auxiliary view of an exploded assembly view. You can use sketched lines for folding.

How do I create a section view in Solidworks assembly?

To create a section view:

1. In a part or assembly document, click Section View. …
2. In the Section View PropertyManager, under Section Method, select one of the following: …
3. In the Section View PropertyManager, under Section Option, select how the section offset is calculated: …
4. Under Section 1, select a plane.

What is partial section view?

A half-section is a view of an object showing one-half of the view in section. Half Section. • Symmetrical parts can be shown in half sections.

Why is it the material is removed in broken-out section?

Material is removed to a specified depth to expose inner details. Specify the depth by setting a number or by selecting geometry in a drawing view. If you create a broken-out section of an exploded view, you cannot collapse the exploded view.

How do you delete a broken-out view in Solid Edge?

Select the broken-out section view profile to edit the broken-out section view. You can use the options on the Broken-Out Profile Selection command bar to modify the profile or extent depth of the broken-out section view. Select the broken-out section view profile to delete it using the Delete key.

What is a removed section view?

The removed section view is a zero-thickness slice through the model showing only cut edges and hatching perpendicular to the cutting line. That’s different than the traditional section view, which is projected parallel to the cutting line.

How do you break an angle view in Solidworks?

In the PropertyManager, under Alignment: Choose the plane and rotation angle for the break.

…

Do one of the following:

1. Click Insert > Model Break View.
2. Click Model Break View (MBD toolbar).
3. In the ConfigurationManager , right-click a configuration and click New Model Break View .

How do I align a section view in Solidworks?

You can pre-select sketch entities that belong to the drawing sheet to create aligned section views. The sketch entities do not have to belong to an existing drawing view. To create an aligned section view: Click Aligned Section View on the Drawing toolbar, or click Insert, Drawing View, Aligned Section.

What surface that needs an auxiliary view?

When an object has a slanted or inclined surface, it usually is not possible to show the inclined surface in an orthographic drawing without distortion. To present a more accurate description of any inclined surface, an additional view, known as an auxiliary view, is usually required.