How do you create a baseline in Civil 3D?

What is baseline in Civil 3D?

When running in Civil 3D, the baseline is named after the alignments on which they are based, less the {Roundabout Name} part. Each baseline has its own assembly which has the same name as the alignment. Each baseline has a single region named Region (1).

What is baseline in corridor?

A Baseline is the primary Station-based design management control device inside a Corridor Feature. It is way too easy to miss the more important point that a Baseline collects the key geometry points and the managed segments relationships.

How do you create a line alignment in Civil 3D?

To Create Feature Lines From Alignments

1. Click Home tab Create Design panel Feature Line drop-down Create Feature Lines From Objects Find.
2. In the drawing, select an alignment. Then press Enter.
3. In the Create Feature Line From Alignment dialog box, specify the feature line options.

How do I add a feature line to a corridor?

Select the Corridor, go into your Corridor Properties and select the Parameters tab. 6. From the Parameters tab, select ADD BASELINE. The Create Corridor Baseline dialog box will appear, select FEATURE LINE from the Baseline type.

How do I add a region to a corridor in Civil 3d?

To add a corridor region using the Corridor Properties dialog box

1. In the drawing, click the corridor, and then click Corridor Properties.
2. In the Corridor Properties dialog box, click the Parameters tab. …
3. In the Create Corridor Region dialog box, select the assembly to assign to the region. …
4. Edit the region.

How do I create a new surface in Civil 3D?

Go to the Prospector tab in Toolspace and right click on Surfaces, select Create Surface. Alternatively, you can type CREATESURFACE at the command line.

How do you move Alignment in Civil 3D?

Exercise 2: Grip Editing an Alignment

1. Zoom to the area around circle B.
2. Click the alignment. …
3. Click the midpoint grip at the midpoint of the curve. …
4. Click a new location for the curve to pass through. …
5. Click the radius grip directly above the pass-through point grip and experiment with moving it.

How do you offset alignment in Civil 3D?

To Create Offset Alignments and Associated Profiles

1. Click Home tab Create Design panel Alignment drop-down Create Offset Alignment Find.
2. In the Create Offset Alignments dialog box, select the following attributes: …
3. On the General tab, enter the site, alignment style, layer, and label set for the offset alignments.

How do I add a feature line to my surface?

Adding a Feature Line to a Surface as a Breakline

1. Right-click a feature line Add To Surface As Breakline. Note. …
2. In the Select Surface dialog box, select a surface, and press OK. Or, select the Add button to create a new surface.
3. In the Add Breaklines dialog box, specify the breakline options. Press OK.

How do you edit the corridor surface in Civil 3D?

To Edit Corridor Surfaces

1. In the drawing, click the corridor.
2. Click Corridor tab Modify Corridor panel Corridor Surfaces Find.
3. In Corridor Surfaces dialog box, click the Surfaces tab.
4. In the properties table, select the surface that you want to edit.
5. To modify the name of the surface, click the name.