How do you change the view of an object in Solidworks?

How do I change the orientation of an object in SolidWorks?

Select the top view from view orientation of “Heads-up View Toolbar” or press “ctrl+5” then click Update Standard View button and choose the front view. A pop-up message will show-up to confirm if you want to change the view, click yes. This feature is the easiest way to change the orientation of your part.

How do I change the view of a drawing?

To change the angles in a drawing view with respect to the normal, the horizontal, the vertical, or a specified edge or axis:

1. Select a general view to reorient. …
2. Right-click and click Properties. …
3. Click Angles under View Orientation. …
4. Select the type of reference that you want to specify from the Rotation reference list.

How do you change the front view in Solidworks?

Changing the Orientation of the Standard Model Views

1. Do one of the following: Use the Rotate, Zoom, and Pan tools to orient the model. Click View Selector and select a view. …
2. Click Update Standard Views .
3. When prompted, select the standard view you want to assign the current view to.
4. Click Yes to confirm the update.

How do you change isometric view in Solidworks?

To change the orientation of a section or aligned section view to isometric: Right-click a section or aligned section view and select Isometric Section View. To remove the isometric orientation, right-click the view and select Remove Isometric View.

How do you use alternate position view?

Insert a model view of the assembly using the orientation needed for the Alternate Position View. Position the assembly in its starting position. (Drawing toolbar), or click Insert > Drawing View > Alternate Position. The Alternate Position PropertyManager appears.

How do you get Trimetric view in SOLIDWORKS?

Click Tools > Customize and select or clear Use Large Tooltips to enable or disable the view previews. flyout button in the Orientation dialog box to select axonometric (isometric, dimetric, or trimetric) views and to set which type of axonometric view is displayed when you select a View Selector corner.

What is an auxiliary view in SOLIDWORKS?

An Auxiliary View is similar to a Projected View, but it is unfolded normal to a reference edge in an existing view. You can create an auxiliary view of an exploded assembly view. You can use sketched lines for folding.

How do I rotate a detail view in Solidworks?

Rotating a Drawing View Around its Center Point

1. Click Rotate View. (View toolbar), or right-click the view and select Zoom/Pan/Rotate > Rotate View. …
2. Do one of the following: Drag the view to the desired rotation. …
3. Set options, then click Apply: …
4. Click Close to close the dialog box.

Where is the view toolbar in Solidworks?

To display SOLIDWORKS toolbars:

1. Right-click in the window border and select or clear a toolbar name.
2. Click Tools > Customize. On the Toolbars tab, select the toolbars to display.

How do I change the view angle in Solidworks?

Click Rotate View (View toolbar) or View > Modify > Rotate then drag the pointer . Drag with the middle mouse button. Press the arrow keys. Hold down Shift to rotate in 90° increments.

How do you change the front view in Solid Edge?

How to set viewes in Solid Edge?

1. Click View Tab.
2. On the “Views” Group, click the flyout (down arrow on bottom of scroll bar). This will display a flyout menu with and entry for “Save Current View” and “View Manager”
3. Click the “View Manager” entry to display the “Named Views” Dialog.