How do you break section view in Solidworks?

How do you slice view in SolidWorks?

To create a section view:

1. In a part or assembly document, click Section View. …
2. In the Section View PropertyManager, under Section Method, select one of the following: …
3. In the Section View PropertyManager, under Section Option, select how the section offset is calculated: …
4. Under Section 1, select a plane.

How do you do a cutaway view in SolidWorks?

To create a part cutaway view:

1. In the part: Create a new configuration for the cutaway view. Cut the part as it should appear in the drawing view. …
2. In the drawing: Create a model view of the part using the configuration you made for the cutaway. Add cross hatching to the cut faces.

What is a break view in SolidWorks?

You can use a break (or interrupted) view in a drawing. Break views make it possible to display the drawing view in a larger scale on a smaller size drawing sheet. You create a gap or break in the view using a pair of break lines.

What is a partial section view?

Partial section. Creates a section view that is limited by the length of the section line if the line does not span the entire view. Slice section. Shows only the faces cut by the section line.

What is the cutaway showing?

A cutaway drawing, also called a cutaway diagram is a 3D graphics, drawing, diagram and or illustration, in which surface elements of a three-dimensional model are selectively removed, to make internal features visible, but without sacrificing the outer context entirely.

How do you break an isometric view in Solidworks?

Model Break Views Within Drawings

1. In the Drawing View PropertyManager, under Reference Configuration, select Show in exploded or model break state.
2. Right-click the drawing view and click Properties. In the dialog box, in Configuration information, select Show in exploded or model break state, and click OK.

How do you break links in Solidworks drawing?

To break the link from the original part file:

1. In the FeatureManager design tree, right-click the inserted third-party native CAD file and click Break Link.
2. In the dialog box, click one of the following: Yes, break the link (cannot be undone) . Breaks the link of the inserted part file from the original file.