How do you bend a line in SolidWorks?

How do you bend in Solidworks?

To create a sketched bend feature:

1. Sketch a line on a planar face of the sheet metal part. …
2. Click Sketched Bend. …
3. In the graphics area, select a face that does not move as a result of the bend for Fixed Face .
4. Click a Bend position of Bend Centerline , Material Inside , Material Outside , or Bend Outside .

Can you bend parts in Solidworks?

The Bends PropertyManager allows you to convert a shelled part to a sheet metal part. To use the Bends PropertyManager to convert a part to sheet metal: Click Insert Bends (Sheet Metal toolbar) or click Insert > Sheet Metal > Bends.

How do you bend a dimension line in Solidworks?

Right-click a dimension extension line and select Display Options > Jog. Horizontally or vertically drag a point on the dimension extension line to create a bend.

How do you put in bends?

Using Insert Bends to Add a Body

1. In a sheet metal part, select or create a plane and draw a profile sketch.
2. Click Extruded Boss/Base (Features toolbar).
3. In the PropertyManager: Set the direction and depth of the extrusion. …
4. Click Insert Bends. (Sheet Metal toolbar) or Insert > Sheet Metal > Bends .
5. In the PropertyManager:

How do you bend a part in Solidworks 2019?

The Bends PropertyManager allows you to convert a shelled part to a sheet metal part. To use the Bends PropertyManager to convert a part to sheet metal: Click Insert Bends (Sheet Metal toolbar) or click Insert > Sheet Metal > Bends.

How do you flex bend in Solidworks?

To create Flex features, click Flex (Features toolbar) or Insert > Features > Flex, set the PropertyManager options, and click .

…

You can create four types of flexes:

1. Bending.
2. Twisting.
3. Tapering.
4. Stretching.

How do you break a dimension line in Solidworks?

On the Leaders tab of the respective PropertyManager, under Break Lines:

1. Select Break extension lines to break extension lines around dimension lines and other extension lines.
2. Select Break dimension line to break the dimension line around other dimension lines and other extension lines.

How do you make a foreshortened dimension in Solidworks?

To set a document-level default for the foreshortened style, with a drawing open, click Tools > Options > Document Properties > Dimensions > Linear and under Foreshortened, select a style. You can also specify to automatically foreshorten a linear dimension when the geometry of one end is outside the drawing view.

How do you break a line in Solidworks?

Select a drawing view and click Break (Drawing toolbar) or click Insert, Drawing View, Break. Set options in the PropertyManager: Add vertical break line.

…

A break line attaches to the pointer.

1. Click in the view twice to place two break lines, creating the break. …
2. Add additional break lines as necessary. …
3. Click .

How do you add bend notes in Solidworks?

In any sheet metal part, right click on the flattened pattern and select ‘Insert bend notes. ‘ The flattened pattern includes all of the bend notes on the flattened view. This includes the bounding box in the 2D view for easy reference.

How do I use the edge flange in Solidworks?

Adding Edge Flanges

1. In an open sheet metal part, click Edge Flange. (Sheet Metal toolbar) or Insert > Sheet Metal > Edge Flange.
2. In the graphics area, select one or more edges for Edge . There are specific requirements for adding edge flanges to curved edges. …
3. Set options in the Edge-Flange PropertyManager and click .

How do you bend angle iron in Solidworks?

Click Lofted Bend (Sheet Metal toolbar) or Insert > Sheet Metal > Lofted Bends. Under Manufacturing Method, select Bent. The bent manufacturing method creates real physical bends, rather than formed geometry and approximated bend lines in a flat pattern.