How do you bend a dimension line in SolidWorks?

How do you bend a line in SOLIDWORKS?

To show bend lines in flat patterns, do one of the following:

1. Click View > Hide/Show > Sketches.
2. In the FeatureManager design tree, expand Flat-Pattern and Flat-Pattern( n ) . Right-click Bend-Lines and click Show .

How do you break a dimension line in SOLIDWORKS?

On the Leaders tab of the respective PropertyManager, under Break Lines:

1. Select Break extension lines to break extension lines around dimension lines and other extension lines.
2. Select Break dimension line to break the dimension line around other dimension lines and other extension lines.

How do I change the bend line style in SOLIDWORKS?

To change the format or language of the bend line notes, set Format to Exchange, then in Tools > Options > System Options > File Locations, set Show folders for to Sheet Metal Bend Line Note File, and set the file location to the desired format or language.

How do you add bend notes in SOLIDWORKS?

In any sheet metal part, right click on the flattened pattern and select ‘Insert bend notes. ‘ The flattened pattern includes all of the bend notes on the flattened view. This includes the bounding box in the 2D view for easy reference.

Can you bend in Solidworks?

SOLIDWORKS Flex Feature for bending, stretching, tapering, and twisting your parts.

How do you bend a line in CAD?

In the graphics window, click any line, sketch point, or included geometry to start the bend. Click to select a second line to complete the bend.

How do you make a foreshortened dimension in Solidworks?

To set a document-level default for the foreshortened style, with a drawing open, click Tools > Options > Document Properties > Dimensions > Linear and under Foreshortened, select a style. You can also specify to automatically foreshorten a linear dimension when the geometry of one end is outside the drawing view.

How do I change the leader line in Solidworks?

To set line thickness and style:

1. Click Options , and then select the Document Properties tab.
2. Select the type of annotation or dimension for which you intend to customize the frame or leader line thickness.
3. Select a thickness from the list, or select Custom Size and enter a value for the custom thickness.

What is the extension line?

Extension lines continue or extend from the surface of the object and establish the size of the dimension. They do not touch the object lines and extend slightly past the dimension line. Extension lines provide a means of displaying a measurement without placing the dimension on the part.

How do you make a sketched bend in Solidworks?

To create a sketched bend feature:

1. Sketch a line on a planar face of the sheet metal part. …
2. Click Sketched Bend. …
3. In the graphics area, select a face that does not move as a result of the bend for Fixed Face .
4. Click a Bend position of Bend Centerline , Material Inside , Material Outside , or Bend Outside .

Where is the line format toolbar in Solidworks?

If you’re going to be making a lot of changes, it may be convenient to enable the Line Format toolbar by clicking on View > Toolbars > Line Format. You’ll not only have access to the tools mentioned above but layers as well.

How is bend radius measured?

A radius of a circle is the length of a line from the center of a circle to its perimeter. When measuring a curved bend you can measure from the inside of the bend or outside to yield the inside or outside radius respectively.

How do you display sheet metal bending notes in Solidworks?

To toggle the visibility of the sheet metal bend notes:

1. Select the flat pattern drawing view to display the Drawing View PropertyManager.
2. Click More Properties.
3. In the View Properties tab, clear Display sheet metal bend notes. You can also right-click Drawing View. in the FeatureManager design tree and select Properties.