How do you add a part to the Origin in Solidworks?

How do I move a part to the Origin in Solidworks?

Click Tools > Sketch Tools > Align > Align Grid/Origin. In the Align Grid/Origin PropertyManager, under Selections: To change only the sketch origin: Select a vertex or point for Sketch Origin Location .

How do you fix a part in Solidworks assembly to the Origin?

To fix or float an assembly component:

1. Right-click the component in the graphics area or the component’s name in the FeatureManager design tree.
2. Select Fix or Float.
3. In assemblies with multiple configurations, select This Configuration, All Configurations, or Specified Configurations.

How do you move parts in Solidworks?

Click Move Component (Assembly toolbar) or Tools > Component > Move. The Move Component PropertyManager appears, and the pointer changes to . Select one or more components in the graphics area. Select a component and drag in any direction.

How do I translate a part in Solidworks?

Click Move/Copy Bodies (Features toolbar) or Insert > Features > Move/Copy . Specify parameters to move, copy, or rotate bodies. Apply mates between bodies. Click Translate/Rotate or Constraints at the bottom of the PropertyManager (if necessary) to switch to the page you want.

How do you ground a part in Solidworks assembly?

To define a ground plane:

1. In an assembly, click Insert > Reference Geometry > Ground Plane.
2. In the PropertyManager, in Ground Plane, select a face in the assembly.
3. (Optional.) Click Reverse Direction , or click the handle in the graphics area.
4. Click . Ground Plane appears in the FeatureManager design tree.

How do you assemble Solidworks assembly?

To add a mate:

1. Click Mate (Assembly toolbar), or click Insert > Mate.
2. In the PropertyManager, under Mate Selections, select the entities that you want to mate together for Entities to Mate . …
3. Click to close the PropertyManager, or click before you click to create a new mate.

How do I allow a part to move in an assembly in Solidworks?

To make a subassembly flexible: Click a subassembly in the FeatureManager design tree and select Component Properties . In the dialog box, under Solve as, select Flexible, then click OK.

How do you move a cut in Solidworks?

To move more than one feature at a time, hold down Ctrl as you select the features.

…

To move a feature to a new place on a model:

1. Select Instant3D (Features toolbar).
2. In the graphics area, select the feature to move.
3. Use the handles to drag the feature to its new location.

How do I move multiple parts in a Solidworks assembly?

To move components in the FeatureManager design tree: In the FeatureManager design tree, drag the component you want to move. You can Ctrl + drag to move multiple components at the same time. As you move over other components, the pointer changes to indicate what will happen if you drop the component there.

Can you copy a part in Solidworks?

To copy multiple components: In the FeatureManager design tree, Ctrl + select or Shift + select the components to copy. Ctrl + drag the selected components and drop them in the graphics area. New instances of the components are created.

How do you copy and paste parts in Solidworks?

To copy and paste a sketch:

1. Select the closed sketch in the FeatureManager design tree.
2. Click Edit > Copy or press Ctrl+C.
3. Click in the sketch or document where you want to paste the center of the sketch.
4. Click Edit > Paste or press Ctrl+V.

Where is the Features toolbar in Solidworks?

SOLIDWORKS Toolbars

• Right-click in the window border and select or clear a toolbar name.
• Click Tools > Customize. On the Toolbars tab, select the toolbars to display.