How do I use the slot in Catia v5?

What are the commands in Catia v5?

Let’s see how each of these command are used.

• PAD command.
• POCKET command.
• SHAFT command.
• GROOVE command.
• RIB command.
• SLOT command.

How do I add tools to Catia v5?

In CATIA, select Tools >> Customize, pick the Toolbars tab then pick the New… button. 2. Select the new toolbar from the list, then pick Add Commands to add the TcIC commands available from the list.

How do I create a point in Catia v5?

On plane

1. Click Point . …
2. Select the On plane point type.
3. Select a plane. …
4. You can select a point to define a reference for computing coordinates in the plane. …
5. Optionally, select a surface on which the point is projected normally to the plane. …
6. Click in the plane to display a point.
7. Click OK to create the point.

How do you make a shaft in Catia?

Open the Revolution. CATPart document and make sure that PartBody is set as current. Select Sketch.

…

An open profile (not even closed by the revolution axis) cannot be be used as the first feature in a body.

1. Click Shaft . …
2. Click OK to close the warning message and display the Shaft Definition dialog box.

What is Groove command in Catia?

Grooves are revolved features that remove material from existing features. This task shows you how to create a groove, that is how to revolve a profile about an axis (or construction line).

What is pocket in CATIA?

Creating a pocket consists in extruding a profile or a surface and removing the material resulting from the extrusion. The application lets you choose the limits of creation as well as the direction of extrusion. The limits you can use are the same as those available for creating pads.

How do you do a Boolean in CATIA V5?

Understanding Boolean Operations in CATIA V5

1. Assemble.
2. Add.
3. Remove.
4. Intersect.
5. To derive a single body from two different bodies, Intersect Boolean operation is used. Basically, the intersected portion is the output which is displayed as a single body. There is no effect of polar bodies here.
6. Union Trim.
7. Remove Lump.

How do I open sketch Tools in CATIA?

In CATIA, a sketch is drawn in the Sketcher workbench. To invoke the Sketcher workbench, choose the down arrow available on the right of the Sketcher button in the Sketcher toolbar; a flyout appears.

How do I Section A section in CATIA?

Creating 3D Section Cuts

1. Select Insert > Sectioning from the menu bar, or click Sectioning in the DMU Space Analysis toolbar and create a section plane. …
2. In the Definition tab, click Volume Cut to obtain a section cut:

Where is the pad in CATIA V5?

Creating Pads

1. Click Pad . The Pad Definition dialog box appears and the application previews the pad to be created.
2. Enter 40 in the Length field to increase the length value. You can increase or decrease length values by dragging LIM1 or LIM2 manipulators. …
3. Optionally, click Preview to see the result.
4. Click OK .

How do you create a point?

To Create Points at Specified Coordinates

1. Select settings and create styles, layers, point groups, and description keys.
2. Click Home tab Create Ground Data panel Points Menu Create Points – Miscellaneous Manual . …
3. Specify the location for the point in the drawing.