How do I stretch a model in Solidworks?

How do you make a part longer in SolidWorks?

In a part document, click Scale (Features toolbar) or Insert > Features > Scale . Set options in the PropertyManager. The geometry of the model increases or decreases in size according to the scaling factors and other options you set.

How do I change a model plane in SolidWorks?

Right-click the sketch in the FeatureManager design tree, and select Edit Sketch Plane . Select a new plane in the FeatureManager design tree or select a new planar face in the model for Sketch Plane/Face . Click OK .

How do I create a spring model in SolidWorks?

Spring in SolidWorks

1. Step 1: Choose a Top Plane. Choose top plane and start. …
2. Step 2: Sketch & Draw. Then choose Front plane to sketch and draw a center line from the center up. …
3. Step 3: Smart Dimensions. …
4. Step 4: Open 3D Sketch. …
5. Step 5: Select Spline & Line. …
6. Step 6: Sketch Again. …
7. Step 7: Open 3D Sketch. …
8. Step 8: Composite Curve.

How do you enlarge a drawing in Solidworks?

You can change the scale of a drawing sheet by selecting a scale from a predefined list or specifying a custom scale. To change the scale of an existing drawing sheet: In the status bar, click Sheet Scale and click a scale. If there are annotations in the drawing sheet, specify options in the dialog box and click OK.

How do I enlarge a sketch in Solidworks?

To scale a sketch:

1. In an active sketch, click Modify Sketch. (Sketch toolbar) or Tools > Sketch Tools > Modify.
2. In the dialog box, under Scale About, select one of the following: Option. Description. Sketch origin. …
3. Type a value for Factor, and press Enter. You cannot scale a sketch that has external references.
4. Click Close.

How do you change XYZ in Solidworks?

To specify the up axis for view orientation:

1. Open a model.
2. Click View Orientation (View toolbar).
3. In the Orientation dialog box, click the Up Axis flyout and select an option: Apply Y-up views. Uses the Y-axis as the up orientation for views. Apply Z-up views. Uses the Z-axis as the up orientation for views.

How do you change UCS in Solidworks?

To translate a coordinate system to a new location:

1. Click Coordinate System (Reference Geometry toolbar) or Insert > Reference Geometry > Coordinate System .
2. Define the coordinate system at a location on the part or assembly that provides the entities you need to control the angle and direction of each axis.

How do you move a sketch plane?

The first and more straightforward way to move a sketch to a different face is to right-click on the sketch in the feature tree. From there, you can click the button to “edit sketch plane.” This will highlight the existing face, and all you need to do to move it is to select the new face.

How do you flex bend in SolidWorks?

To create Flex features, click Flex (Features toolbar) or Insert > Features > Flex, set the PropertyManager options, and click .

…

You can create four types of flexes:

1. Bending.
2. Twisting.
3. Tapering.
4. Stretching.

How do you bend part in SolidWorks?

To create a sketched bend feature:

1. Sketch a line on a planar face of the sheet metal part. …
2. Click Sketched Bend. …
3. In the graphics area, select a face that does not move as a result of the bend for Fixed Face .
4. Click a Bend position of Bend Centerline , Material Inside , Material Outside , or Bend Outside .

How do you make a spring flexible in SolidWorks?

Click . In the FeatureManager design tree, right-click Spring<1> and click Make Part Flexible in the context menu.