How do I show a void in Revit?

Where is the void in Revit?

You need to do Cut Geometry > object > family with void, in the project.

How do you show voids in a plan?

Right click in the third floor plan (empty area) and select override graphics in view, select element, and change the surface pattern to solid, pick a color and say OK.

How do you get a void extrusion in Revit?

Click Modify | Create Extrusion tab Mode panel (Finish Edit Mode). Revit Architecture completes the extrusion and returns you to the view in which you started the extrusion. To view the extrusion, open a 3D view.

How do you make a void family in Revit?

Create a Void Family with an Elliptic Profile

1. Create a new family using the Metric Generic Model face based. …
2. Select the 3D Front view.
3. Click Create tab Datum panel (Reference Plane).
4. Place a new horizontal reference plane in the middle of the slab extrusion:
5. Select the new reference plane.
6. In the Properties palette:

Why is void extrusion orange?

“When you create a void form while in the Family Editor, it will appear in the 3D views as a transparent form and as orange lines in plan and elevation views, as long as it is not cutting any solid geometry.” So, if it’s not cutting anything, then it’ll be orange.

How do you edit a void in Revit?

Follow the steps below to edit the void.

1. Find the void in the Project Browser.
2. Right click on the type from the Project Browser.
3. Click on “Select all Instances.. “
4. Choose “In entire project”
5. From the Ribbon select “Edit In Place”

What is a void area?

A Void Area refers to the empty space above the floor in a strata unit but the area is included in the total saleable floor area of the strata unit. It is usually found in a property with a very high ceiling. … Some examples of Void Areas are void over staircase, or a dou- ble-volume living room within a maisonette.

What is void floor plan?

A void is a ‘vacant’ area where a floor would normally be on the second storey. So an upstairs room is missing because there is no floor to the area. … An area that is fully enclosed or trapped between other services, rooms or walls within a building and occupy floor area.

How do you cut a void wall in Revit?

Solution:

1. Edit the in place wall.
2. Create a new void extrusion that will define the opening.
3. Use the “Cut” tool and select the void geometry.
4. Finish the solid edition.