How do I make a groove in Revit?

On the Modelling tab, click Host Sweep > Wall Sweep or Wall Reveal if you want to create grooves instead. Select your profile from the drop-down menu. Click Vertical, and then place the sweep on the wall. Click Array and enter the number of sweeps that you need for the wall.

How do you create a groove in Revit?

Solution:

1. Create a void family from a generic template.
2. Place the family on a wall surface.
3. In the Properties palette, use the parameter to adjust the height of the family.
4. After the void family overlaps the column, click Modify tab > Geometry panel > Cut to cut the groove from the column.

How do you create a void floor in Revit?

Create a Void Form

1. On the Create tab Draw panel, select one of the drawing tools.
2. Click in the drawing area, and draw a closed loop that intersects solid geometry.
3. Select the closed loop.
4. Click Modify | Lines tab Form panel Create Form drop-down (Void Form).

Where is the cut Geometry tool in Revit?

Click Modify tab Geometry panel Cut drop-down (Cut Geometry). Select the object to be cut. Select the instance with which to cut.

How do you add paneling to wall in Revit?

The process of creating a structural wall is similar.

1. Open a floor plan view or a 3D view.
2. Click Architecture tab Build panel Wall drop-down (Wall: Architectural).
3. If you want to place a wall type other than the one displayed in the Type Selector, select a different type from the drop-down.

How do you cut a void wall in Revit?

Solution:

1. Edit the in place wall.
2. Create a new void extrusion that will define the opening.
3. Use the “Cut” tool and select the void geometry.
4. Finish the solid edition.

How do you extrude a slab in Revit?

Start with Structure > Component > Model in Place and select Floors or Structural Foundations as the category as you see fit. 5. Click on the Create > Extrusion tool.

How do you select a floor in Revit?

In a plan view, select the floor, and click Modify | Floors tab Mode panel Edit Boundary. Watch the tooltip and the status bar to be sure you select the floor, not another element. If desired, you can use a filter to select the floor.

How do I cut a generic model in Revit?

Load the family into the project and place it. Click Modify tab Geometry panel Cut drop-down (Cut Geometry). Select the object to be cut. Select the instance with which to cut.