How do I flatten bends in Solidworks?

How do you flatten a drawing in SolidWorks?

Creating Drawings of Flat Patterns

1. Open the sheet metal part for which you want to add a drawing.
2. Click Make Drawing from Part/Assembly. …
3. Select a format or click OK to use the default format.
4. From the View Palette, drag the Flat pattern to the drawing sheet. …
5. Click .

How do you unbend a part in SolidWorks?

Unfolding Bends

1. In a sheet metal part, click Unfold. on the Sheet Metal toolbar, or click Insert > Sheet Metal > Unfold.
2. In the graphics area, select a face that does not move as a result of the feature for Fixed face. . …
3. Select one or more bends as the Bends to unfold. …
4. Click .

Why is surface flatten greyed out?

The reason for the “Flatten” icon being greyed out was because the sheet metal part had a “Flat Pattern” annotation view and this annotation view was active. By selecting another annotation view, the “Flatten” icon then becomes available again.

How do you flatten sheet metal in Solidworks?

Flattening Sheet Metal Bodies

1. In the FeatureManager design tree, select the part and click Flatten. (Sheet Metal toolbar).
2. In the cut list, right-click the body and click Flatten. .
3. In either the FeatureManager design tree or the cut list, right-click the Flat-Pattern. feature for the part and click Unsuppress. .

How do you bend a round bar in Solidworks?

Create Bar Stock That You Can Bend and Unbend in SOLIDWORKS

1. Create a section of round bar stock. …
2. Locate and activate the Flex command. …
3. Now the Flex Manager is open on the left side of the screen, for the first setting, select the outside of the round stock.

How do you flatten dented metal?

One involves using a blow-dryer or a paint stripper which emits heat to warm the metal of the dent. On a molecular level, the increased heat causes the molecules of the sheet metal to become excited. They vibrate at a slightly greater rate, making the sheet metal more pliable.

How do you flatten bent aluminum?

How to Straighten Bent Aluminum

1. Bend the aluminum object as straight as you can with your hands. …
2. Lay the aluminum object on a flat, solid surface, like a concrete floor. …
3. Straighten the aluminum object with your hands as it begins to heat up. …
4. Hit the heated aluminum with the rubber mallet to remove any bumps.

Can you sweep a body in SolidWorks?

For cut sweeps only, you create a solid sweep by moving a tool body along a path. The path must be tangent within itself (no sharp corners) and begin at a point on or within the tool body profile.

…

Sweeps.

How do I change the direction of a bend in SolidWorks?

Editing the Flat Pattern feature, in the Flat-Pattern folder, will display the currently defined “Fixed face”. To change the Bend Direction, select a face that is on the other side of the material. Once complete, the stated Bend Direction in the drawing, will also change.

How do you sweep a shape in SolidWorks?

To create a sweep: Sketch a closed, non-intersecting profile on a plane or a face.

…

Click one of the following:

1. Swept Boss/Base on the Features toolbar or Insert > Boss/Base > Sweep.
2. Swept Cut on the Features toolbar or Insert > Cut > Sweep.
3. Swept Surface on the Surfaces toolbar or Insert > Surface > Sweep.