How do I edit extrusion in SolidWorks?

How do I edit a extruded sketch in Solidworks?

Do one of the following:

1. Click Sketch. on the Sketch toolbar, or click Insert > Sketch. Select an existing sketch to edit.
2. Right-click a sketch in the FeatureManager design tree, or right-click a sketch entity in the graphics area, and select Edit Sketch.

How do I change the extrusion dimension in Solidworks?

To change the geometry of a boss-extrusion you should either:

1. RMB – EDIT FEATURE.
2. RMB – EDIT SKETCH. or.
3. Double click on the feature. The dimensions show up. Double click on each dimension to change.

How do I undo extrusion in Solidworks?

To remove the faces defining the extrude from the model after extruding, click Delete original faces. The green area is the face defining the extrude. The resulting model is hollow where the face was deleted. To create a single body from the extrude when faces are deleted, select Knit result .

How do I edit a part in Solidworks?

To edit a part while in an assembly:

1. Right-click the part and select Edit Part, or click Edit Component on the Assembly toolbar. …
2. Make the necessary changes to the part.

How do you extrusion in Solidworks?

Click Convert to Extrusion (2D to 3D toolbar), or click Tools > Sketch Tools > 2D to 3D > Extrude, and click in the graphics area to establish the direction of the extrusion. The Base-Extrude PropertyManager appears.

How do I edit a model in Solidworks?

Editing Imported Features

1. In the FeatureManager design tree, right-click the feature created from the imported document, and select Edit Feature. …
2. In the Files of type list, select the desired format.
3. Browse to select the desired file to import. …
4. Select the Match faces and edges check box, if desired. …
5. Click Open.

How do you edit cut extrude?

If you enter the wrong distance to extrude to: and exit the boss-extrude dialog without correcting it, go to the design tree, right-click on the extrude name, and find the “edit feature” button in the box of options that appears above the mouse. The dialog will reopen and you can edit the properties of the extrude.

How do you move a cut Extrude in Solidworks?

To move more than one feature at a time, hold down Ctrl as you select the features.
…
To move a feature to a new place on a model:

1. Select Instant3D (Features toolbar).
2. In the graphics area, select the feature to move.
3. Use the handles to drag the feature to its new location.

How do you change depth in Solidworks?

To change the depth of the feature, type a new value in the Depth box, or use the arrows to change the value. To remove drafts from the feature, select the Modify Draft check box. Make sure the Extrude with Draft check box is cleared.

How do you cut intersecting parts in Solidworks?

Intersecting Bodies to Modify Part Geometry

1. With the part open, click Insert > Features > Intersect .
2. For Solids, Surfaces, or Planes, select the bodies to intersect or merge.
3. Select Cap planar openings on surfaces to cap flat openings in surfaces.
4. Click Intersect. …
5. Select regions to exclude. …
6. Select options as required:

How do you delete intersecting parts in Solidworks?

In the PropertyManager, click Intersect. The features you can remove appear in the Regions to Exclude list. Select Region 1, Region 3, and Region 5. The regions you select are not included as added geometry.

Can you mirror an extruded cut in Solidworks?

Mirroring can also be used on more than just part bodies, it can be used on smaller extruded features, cuts, and various shapes that appear symmetrically throughout the part.

How do you update a part in a Solidworks assembly?

To update an assembly:

1. In SOLIDWORKS, open an assembly previously built by CircuitWorks.
2. In CircuitWorks, make the component changes or open a new ECAD file containing the changes.
3. Click Build Model (Tools toolbar).
4. In the dialog box, click Yes to update the open assembly. …
5. To update the SOLIDWORKS assembly, do one:

How do you cut an imported surface in Solidworks?

Click Cut With Surface on the Features toolbar, or click Insert > Cut > With Surface. In the PropertyManager, under Surface Cut Parameters, select the surface or plane to use to cut the solid bodies. Examine the preview. If necessary, click Flip cut to reverse the direction of the cut.

What are breadcrumbs in Solidworks?

Selection breadcrumbs are a context-based view of the current selection. They show related elements in the hierarchical tree for parts and assemblies. You can select an item in the graphics area and refine that selection through the context-based representation of the item by using breadcrumbs.