How do I edit an existing sketch in Solidworks?

How can you correct an over defined sketch in Solidworks?

To manually repair over defined sketches:

1. In the PropertyManager, under Message, click Manual Repair. All relations and dimensions in the sketch appear under Conflicting Relations/Dimensions.
2. Select each relation or dimension to highlight it in the graphics area. For example: …
3. Click Delete. Valid solution found. …
4. Click .

How do I edit text in sketch in Solidworks?

To edit sketch text:

1. In an open sketch, right-click the text (the pointer changes to. when it is over the sketch text) and select Properties.
2. Edit the text and its properties in the Sketch Text PropertyManager as necessary.

How do I edit a shape in Solidworks?

Click Edit > Definition. Right-click a feature in the FeatureManager design tree or the graphics area and select Edit Feature from the context toolbar.

How can you define an over defined sketch?

Over defined dimensions and relations are shown in a different color than the resolved sketch entities.

How do I fix errors in SOLIDWORKS?

To control the rebuild action:

1. Click Options (Standard toolbar) or Tools, Options.
2. Select Stop, Continue, or Prompt for When rebuild error occurs, then click OK.

How do I enable editing in SolidWorks?

The Direct Editing toolbar, visible in Figure 1 below, can be enabled by right clicking an existing tab of the SOLIDWORKS command manager (such as the Features tab) and choosing “Direct Editing.”

How do I edit a part in SolidWorks?

To edit a part while in an assembly:

1. Right-click the part and select Edit Part, or click Edit Component on the Assembly toolbar. …
2. Make the necessary changes to the part.

How do you scale text in sketch in Solidworks?

To set a custom text scale:

1. Click Tools > Options > Document Properties > Detailing . …
2. In the dialog box, clear Always display text at the same size.
3. In Text scale, select Custom.
4. In the two fields, enter the first and second value of the custom scale.

How do I dissolve a sketch text in Solidworks?

If you would prefer the Sketch text to not behave like a block, it can be broken down into its separate sketch entities by right clicking and choosing to “dissolve sketch text.” Dissolving the sketch text will no longer allow you to make changes to the text.

Can I edit text in Solidworks?

Right-click the note text. Select Edit Text in Window. Edit the text in the Note text field.

How do I edit extruded part in Solidworks?

If you enter the wrong distance to extrude to: and exit the boss-extrude dialog without correcting it, go to the design tree, right-click on the extrude name, and find the “edit feature” button in the box of options that appears above the mouse. The dialog will reopen and you can edit the properties of the extrude.

How do you change depth in Solidworks?

To change the depth of the feature, type a new value in the Depth box, or use the arrows to change the value. To remove drafts from the feature, select the Modify Draft check box. Make sure the Extrude with Draft check box is cleared.

How do you move a cut Extrude in Solidworks?

To move more than one feature at a time, hold down Ctrl as you select the features.

…

To move a feature to a new place on a model:

1. Select Instant3D (Features toolbar).
2. In the graphics area, select the feature to move.
3. Use the handles to drag the feature to its new location.