How do I cut a part in SolidWorks?

How do you cut a part in assembly in SolidWorks?

1 Answer

1. In the assembly, click Edit Component for the part to be cut.
2. Insert – Feature – Cavity.
3. Select the part that you wish to do the cutting with.
4. Hide the cutting tool if necessary. You can’t suppress or delete it, as the cavity feature is referencing it.

How do you cut a shape in SolidWorks?

To trim a surface:

1. Create two or more surfaces that intersect at one or more points, or create a surface that intersects with a plane or has a sketch on its face.
2. Click Trim Surface on the Surfaces toolbar, or click Insert > Surface > Trim.
3. In the PropertyManager, under Trim Type, select a type:

How do you split a part in SolidWorks 2020?

To use the Split PropertyManager to divide a part into multiple bodies:

1. In a part, create a sketch to be used to cut the part into bodies.
2. Click Split (Features toolbar) or Insert > Features > Split.

How do I edit a part in SolidWorks?

To edit a part while in an assembly:

1. Right-click the part and select Edit Part, or click Edit Component on the Assembly toolbar. …
2. Make the necessary changes to the part.

How do I make a cavity in SolidWorks?

To create a cavity in the mold base:

1. Optional: Insert the design parts and the mold base into an interim assembly.
2. In the assembly window, select the mold base, and click Edit Component on the Assembly toolbar. …
3. Click Cavity on the Mold Tools toolbar, or click Insert > Mold > Cavity.

How do you trim entities?

You can use Power trim to trim multiple, adjacent sketch entities by dragging the pointer across each sketch entity. You can use Power trim to extend sketch entities along their natural paths. Extends or trims two sketch entities until they intersect at a virtual corner.

How do you split a line in SolidWorks?

To create a projection split line:

1. Click Split Line. (Curves toolbar) or Insert > Curve > Split Line.
2. In the PropertyManager, under Type of Split, select Projection.
3. Under Selections, click: A sketch for Sketch to Project. . You can select multiple contours from the same sketch to split. …
4. Click . Before. After.

How do you cut an imported surface in Solidworks?

Click Cut With Surface on the Features toolbar, or click Insert > Cut > With Surface. In the PropertyManager, under Surface Cut Parameters, select the surface or plane to use to cut the solid bodies. Examine the preview. If necessary, click Flip cut to reverse the direction of the cut.

How do I edit a step in Solidworks 2020?

You need to add a feature to the imported body.

1. Select the bottom face of the imported body.
2. Click Chamfer . …
3. Under Chamfer Parameters, make the desired settings and click OK . …
4. Right-click Imported1 in the FeatureManager design tree and select Edit Feature. …
5. Click OK. …
6. Select the STEP file and click Open.

How do I edit a Solidworks file?

Do one of the following:

1. Click Sketch. on the Sketch toolbar, or click Insert > Sketch. Select an existing sketch to edit.
2. Right-click a sketch in the FeatureManager design tree, or right-click a sketch entity in the graphics area, and select Edit Sketch.