How do I combine models in Fusion 360?

How do I merge two STL files in Fusion 360?

In a nutshell:

1. import STL.
2. In the PATCH workspace, Modify>Mesh>Mesh to BRep.
3. still in PATCH, use Modify>Merge, select chain, and click on planar face to clean up all the triangles.

How do I import one model to another in Fusion 360?

How to Insert another Design or file into the Current Design in…

1. Verify all designs have been saved, upload any designs not already uploaded.
2. Open the design that everything will inserted into (the ‘Assembly’ file).
3. Open the data panel.
4. Right click on the thumbnail of the file that will be inserted.

How do you assemble two parts in Fusion 360?

Right click on one of the components in the data panel, then click “Insert into current design”. Select a location for the component, then click ok. After the component is imported, it can be assembled by using the joint command. Repeat steps 2-4 for all components.

How do I combine STL files into one?

How to merge two meshes:

1. To combine two meshes load both models.
2. Click on Show Layers. …
3. To transform, rotate or scale an object, first select it in the Layer menu and then click on Manipulator Tools.
4. You can now press T to select the Transform option, R to rotate the model and S to start scaling.

Where is mesh to BRep?

Mesh to BRep is only available in Direct Modeling Mode. To enter direct modeling mode, right-click on the Fusion 360 Browser > select “Do Not Capture Design History.” A warning dialog will appear.

How do I move a component from one file to another in Fusion 360?

If the file only contains the one part than all you have to do is just drag the file from your data panel onto your layout in Fusion 360 (assuming that you have new design open). This will automatically prompt a “Move” dialog box to come up.