How do I check my units in Ansys Fluent?

How do I set units in Ansys Fluent?

It is possible to change the unit system in Design Modeler and Ansys Mechanical irrespective of the CAD File extension type. After you import the geometry in Workbench and open Design Modeler to edit the same, you can change the units from the top ribbon tab named “Units”.

How do you view Ansys Fluent results?

In the ANSYS Workbench Project Schematic, double-click the Results cell in the elbow fluid flow analysis system (cell A6). This displays the ANSYS CFD-Post application. You can also right-click on the Results cell to display the context menu where you can select the Edit option.

How do I change units in CFD post?

To change the units of the results, simply right-click on the “thermometer” looking object in the display, and select your result options from there.

How do you change units in Ansys geometry?

go to the units tab and set “display in project units” on. then change the project units to whatever you like.

What are the units in Ansys Apdl?

If you are working with ANSYS APDl, it means there is no unit. You need to remember the unit in which you are working. It may be either SI or CGS.

How do you scale Ansys?

There are a few ways to do that.

1. Use symmetry. Is there any plane of symmetry in your model? …
2. Use Hex elements instead of Tet elements. …
3. Use a coarse mesh in the large volume that has a low gradient in the solution quantity, and apply mesh controls to have a fine mesh in the small volume of high gradient.

How do I change the legend in Ansys?

Editing the Legend



To do so, click the left mouse button in the desired location. A cursor will appear, and you can then type new text or delete the text that was originally there (using the backspace or delete key).

How do you change units in SpaceClaim?

To customize units

1. Select SpaceClaim Options from the File menu to display the SpaceClaim Options window.
2. Click Units from the navigation panel on the left.
3. Select one of the following from the Units settings for drop-down list: …
4. Modify the options on the page.
5. Click OK to save all your changes and close the window.

How can I save fluent results?

File Save Project



Select the Save Project option from the Write a File icon in the FLUENT toolbar. Alternatively, you can also save your Workbench project by selecting the Save option under the File menu within Workbench or by selecting the Save icon from the Workbench toolbar.

How do you display contours in Ansys Fluent?

29.1. 2 Displaying Contours and Profiles

1. Select the variable or function to be contoured or profiled in the Contours of drop-down list. …
2. Choose the surface or surfaces on which to draw the contours or profiles in the Surfaces list. …
3. Specify the number of contours or profiles in the Levels field.

How do I print results in Ansys Workbench?

for example, you can use the APDL command, POST1 (Main Menu>General Postproc), and check PLNSOL (Main Menu>General Postproc>Plot Results>Nodal Solu) to display the results as continuous contours. Alternatively you can use PRNSOL (Main Menu>General Postproc>List Results>Nodal Solution) to print the results into a file.

How do I use Ansys CFD post?

To run CFD-Post standalone, from the Start menu, right-click All Programs / ANSYS 12.0 / Fluid Dynamics / CFD-Post and select Properties. Type the path to your working directory in the Start in field and click OK, then click All Programs / ANSYS 12.0 / Fluid Dynamics / CFD-Post to launch CFD-Post.

What is CFD post processing?

CFD Post-processing in Unity3D☆



Evaluating the effect of buildings on the local climate and vice versa is done by computational fluid dynamics (CFD) methods. The results from CFD are typically visualized through post-processing software closely related to pre-processing and simulation software.

How do you convert Kelvin to Celsius in CFD?

Go to Variables > Solution > Temperature and select the desired units. Then everywhere you use that value in post it is converted to those units.