How do I change the front view in Catia?

Contents

How do I change the view on Catia?

Editing the View Angle

Select View > Commands List then choose View Angle from the list or enter directly c:view angle in the power input field. …
Select Perspective . …
Drag the green arrow (which turns red) to change the view angle.

How do I create a front view in Catia?

Creating a front view

Click Front View in the Views toolbar.
Select one plane of the 3D part or a plane surface, to define the reference plane. Blue arrows appear. …
Click in the drawing to generate the view. By default, the axis and center lines are generated.

How is the front view chosen?

A front view is a projection view obtained by drawing perpendiculars from all points on the edges of the part to the plane of projection. The plane of projection upon which the front view is projected is called the frontal plane.

How do I change the isometric view in Catia?

Changing the View Properties

Right-click the isometric view and select Properties .
On the View tab, check 3D Colors in the Dress-up area.
In the Generation Mode area, select Raster from the View generation mode drop-down list.
Click the Options button. …
Select Shading with edges from the Mode drop-down list.

IT IS INTERESTING: How do you save SOLIDWORKS 2021 in lower version?

How do I change the active view in drafting?

Right-click the view to be set active. The contextual menu appears. 2. Select Activate View from the displayed contextual menu.

What is front view and top view?

Front view of an object shows the width and height dimensions. Page 7. Horizontal plane of projection. Horizontal plane of projection is the plane onto which the Top View of the multi-view drawing is projected. Top view of an object shows the width and depth dimensions.

What is the left side view?

3D views are named from the perspective of the viewer The Left view, is on the left of the object when you look at the front, from the outside of the object. Likewise, the back view is on the back of the object, as you look at the front of the object, from outside the object.

What is the correct front view of the figure?

005.02 Multiview Drawing Activity 1 of 2

A	B
What is the correct FRONT view in figure shown?,	D
The object shown is composed of:,	Normal and oblique surfaces.
If a cylinder is cut as illustrated, the RIGHT SIDE view will contain a/an:,	Ellipse
The edge view of surface “A” will appear TRUE LENGTH in the:,	Right side view.

How do I make a drawing view in Catia?

Go to Tools > Options > Mechanical Design > Drafting > View tab and make sure that Exact view is selected as the view generation mode in the View Generation area (other view generation modes – CGR, Approximate and Raster – are not supported). Click View From 3D in the Views toolbar ( Projections sub-toolbar).

IT IS INTERESTING: How do I create a floor plan in AutoCAD?

What view is viewed from the back of the front view?

Elevation is the view of a 3-dimensional object from the position of a vertical plane beside an object. In other words, an elevation is a side view as viewed from the front, back, left or right (and referred to as a front elevation, [left/ right] side elevation, and a rear elevation).

How do you change the isometric view?

To change the orientation of a section or aligned section view to isometric: Right-click a section or aligned section view and select Isometric Section View. To remove the isometric orientation, right-click the view and select Remove Isometric View.

How do you select an isometric view?

You can now select isometric plane for your drawing by pressing the F5 key. The three Isoplanes available for selection are Isoplane top, right and left. Press F5 key to activate Isoplane top and then select line command and click anywhere in the drawing area to start your line.