How do I change the base part of a SOLIDWORKS file?

How do I change the base part of a Solidworks assembly?

To edit a part while in an assembly:

1. Right-click the part and select Edit Part, or click Edit Component on the Assembly toolbar. …
2. Make the necessary changes to the part.

How do you change the part reference in Solidworks?

To edit the locations and names of referenced files:

1. Click Open or File > Open.
2. In the Open dialog box, click References. The Edit Referenced File Locations dialog box appears.
3. Edit the path or filename using one of the following methods: …
4. Click OK to make the changes and exit the dialog.

How do I alter an assembly in Solidworks?

Edit Assembly

1. Click Open (Standard toolbar) or File > Open.
2. In the dialog box, select an assembly, and then in Mode, select Large Design Review.
3. Select Edit Assembly.
4. Click Open. An eye overlay appears on the icons of all components indicating that the assembly is in Large Design Review mode.

How do I edit a component in Solidworks?

To edit component properties:

1. From the CircuitWorks Component Library dialog box, select the component from the component list.
2. Click File > Edit Component or click Edit properties for selected component (Component Library toolbar).
3. Change component properties as needed. …
4. Click Accept Changes .

Can you replace a part in a Solidworks assembly?

You can replace components in an assembly. You can replace a part with a subassembly or vice versa. You can replace one, more than one, or all instances of a component at the same time.

How do you remove a part from assembly in Solidworks?

To delete a component from an assembly:

1. Click the component in the graphics area or in the FeatureManager design tree.
2. Press the Delete key, click Edit > Delete, or right-click and select Delete.
3. Click Yes to confirm the deletion.

Where are solidworks part files located?

The File Location Check verifies the location of the document templates against the settings in Tools > Options > System Options > File Locations .

How do you make a derived part in Solidworks?

To create a derived part from an assembly component:

1. In an assembly document, select a component.
2. Click File > Derive Component Part. …
3. Under Transfer, select any combination of items from the seed component to be included in the derived part.

How do you cut intersecting parts in Solidworks?

Intersecting Bodies to Modify Part Geometry

1. With the part open, click Insert > Features > Intersect .
2. For Solids, Surfaces, or Planes, select the bodies to intersect or merge.
3. Select Cap planar openings on surfaces to cap flat openings in surfaces.
4. Click Intersect. …
5. Select regions to exclude. …
6. Select options as required:

Can you scale parts in assembly solidworks?

In a part document, click Scale (Features toolbar) or Insert > Features > Scale . Set options in the PropertyManager. The geometry of the model increases or decreases in size according to the scaling factors and other options you set. The Scale feature scales only the geometry of the model.

How do you switch between configurations in an assembly?

Configure Component

1. In an assembly, right-click a component and click Configure Component .
2. In the Modify Configurations dialog box, you can: Create new assembly configurations. Change the component configuration used in each assembly configuration. Suppress or unsuppress the component for each assembly configuration.

How do I edit a part in Creo?

To Edit a Part Feature. 1. In an open assembly, select the part in the Model Tree or graphics window and choose Activate from the shortcut menu to edit, create, delete, and suppress part features. The Copy From command is not available.

How do I edit a step in Solidworks 2020?

You need to add a feature to the imported body.

1. Select the bottom face of the imported body.
2. Click Chamfer . …
3. Under Chamfer Parameters, make the desired settings and click OK . …
4. Right-click Imported1 in the FeatureManager design tree and select Edit Feature. …
5. Click OK. …
6. Select the STEP file and click Open.