Frequent question: What is the function of power trim in Solidworks?

How do you trim in Solidworks?

To trim with the Power trim option: Right-click the sketch and select Edit Sketch. (Sketch toolbar) or Tools > Sketch Tools > Trim. Click in the graphics area next to the first entity, and drag across the sketch entity to trim.

How many types of trim are in Solidworks?

You can use any of the following trim options: Power trim. Corner. Trim away inside.

How do you cut part of a circle in Solidworks?

Trim Away Outside

1. Right-click the sketch and select Edit Sketch.
2. Click Trim Entities on the Sketch toolbar, or click Tools, Sketch Tools, Trim.
3. In the PropertyManager, under Options, select Trim away outside .
4. Select two bounding sketch entities.
5. Select the sketch entities to trim.
6. Click OK .

How do you split a sketch in Solidworks?

To split a sketch entity:

1. In an open sketch, click Split Entities. (Sketch toolbar) or Tools > Sketch Tools > Split Entities. …
2. Click the sketch entity at the location where you want the split to occur. The sketch entity splits into two entities, and a split point is added between the two sketch entities.

What is trim entity solidworks?

Trims open sketch entities outside of two bounding entities. Trimming with Trim to Closest. Trimming a 3D Sketch. Trim PropertyManager. You can use the Trim PropertyManager to select a trim type and control other trimming options.

How do you trim a 3D object in Solidworks?

To trim a 3D sketch:

1. Start the 3D sketch on a 2D plane.
2. Then do either of the following: Right-click and select 3D sketch on a plane. Double-click a plane or sketch entity. You can use any of the following trim options: Power trim. Corner. Trim away inside. Trim away outside. Trim to closest.

How do you trim an intersecting body in Solidworks?

Intersecting Bodies to Modify Part Geometry

1. With the part open, click Insert > Features > Intersect .
2. For Solids, Surfaces, or Planes, select the bodies to intersect or merge.
3. Select Cap planar openings on surfaces to cap flat openings in surfaces.
4. Click Intersect. …
5. Select regions to exclude. …
6. Select options as required:

How do I merge surfaces in SolidWorks?

In the PropertyManager, under Selections:

1. Select faces and surfaces for Surfaces and Faces to Knit .
2. Select Try to form solid to create a solid model from enclosed surfaces.
3. Select Merge entities to merge faces with the same underlying geometry.