Frequent question: How do you lock an element to a reference plane in Revit?

How do you lock a reference plane in Revit?

To constrain the sketch of a piece of geometry during creation:

1. Use the Align tool and select the specific reference plane and the sketch line to establish the constraint.
2. When the lock symbol displays, click it to lock the constraint.

How do you lock an extrusion to reference plane in Revit?

Reference planes are used as construction and guide lines. While in a sketch mode (or after finishing the sketch), a line in an extrusion can be locked with the reference plane it’s on top of by using the align tool to click both lines and then clicking the lock icon (see Figure 11).

How do you lock an object in Revit?

Select the elements to be pinned, and then click Modify | tab Modify panel (Pin). Click Modify tab Modify panel (Pin), select the elements to be pinned, and then press Enter .

What is the difference between reference plane and reference line in Revit?

What is the difference between reference planes and reference lines? A Reference Plane is an infinite plane that servers as a guide for drawing lines and geometry. A Reference Line creates a line similar to a reference plane, but that has logical start and end points.

How do you create a work plane in Revit?

Select a work plane by name, by picking a plane, or by picking a line in the plane you want to select. On the ribbon, click (Set). In the Work Plane dialog, under Specify a new Work Plane, select one of the following options: Name—Choose an available work plane from the list, and click OK.

How do you lock a circle in a Revit family?

Go to the Modify tab and select the Align command from the Modify panel. You can now select the vertical reference plane, then the little cross at the circle centerpoint to lock the circle to that plane. Repeat the Align command to lock the circle to the horizontal reference plane.

Where are reference planes in Revit?

On the ribbon, click (Reference Plane). To draw a line: On the Draw panel, click (Line). In the drawing area, draw the reference planes by dragging the cursor.

What is reference plane in engineering drawing?

A reference plane is a plane in 3D space used as the workspace for drawing and the basis for other interactive actions. The initial reference plane is the XY plane (or ground plane). The reference plane may be one of the three Cartesian planes (XY, YZ, ZX), or it may be a custom plane.

What is a work plane in Revit?

A work plane is a virtual 2-dimensional surface used as the origin for a view or for sketching elements. Work Plane Set or Show or Viewer. on the Architecture, Structure, or Systems tab in projects. on the Create tab of the Family Editor.

Can you lock a Revit model?

The lock can be applied to an entire Revit Server Host, all the models in a folder, or a single model. Open the Revit Server Administrator. In the tree control, select the item, and click (lock).

How do I lock an imported CAD in Revit?

Click Modify tab > Modify panel > (Pin), select the elements to be pinned, and then press Enter.

…

Using Pin to Lock Elements in Place

1. When you pin a modelling element e.g. a wall or floor, it cannot be moved.
2. If you try to delete a pinned element, Revit warns you that the element is pinned.