Frequent question: How do you hide hidden edges in Solidworks?

How do you hide edges in Solidworks?

To hide or show edges in a drawing:

1. Click Hide/Show Edges. …
2. Select the edges to hide (you can select edges individually, or use box selection), then click . …
3. To show edges, click Hide/Show Edges. …
4. Select the hidden edges highlighted in orange, (you can select edges individually, or use box selection), then click .

What is show edges hide menu?

You can show all the hidden lines of selected features and components in drawing documents. You can hide or show edges in high quality (not draft quality) drawing views.

How do you hide tangent edges in Solidworks?

To change this on your system, go to Tools > Options, then under the System Options tab, select Display/Selection from the list on the left, then in the “Part/Assembly tangent edge display” choose “As Phantom.” Other options include “As visible” (the default setting) or “Removed” (see below).

How do you show hidden lines in Solidworks 2020?

To control how hidden edges are displayed:

1. Click Tools > Options > System Options > Display.
2. Select Solid or Dashed for Hidden edges displayed as.
3. Click OK.

How do I make hidden lines visible in Solidworks?

Click Tools > Options > System Options > Display. Select Solid or Dashed for Hidden edges displayed as. Click OK.

How do you hide a drawing in Solidworks?

To hide a sketch in a drawing, right-click the sketch in the graphics area or in the FeatureManager design tree and select Hide.

How do you remove fillet edges in Solidworks?

Hover over another fillet in the FeatureManager design tree that is applied to multiple edges. You want to remove the fillet from the circular edge only. Select the circular filleted edge. Click Remove.

How do you show tangent edges in Solidworks drawings?

Part/Assembly edge display

Controls how tangent edges are displayed when the model is in Hidden Lines Removed, Hidden Lines Visible, or Shaded With Edges mode. You can also click View > Display, and select Tangent Edges Visible, Tangent Edges as Phantom, or Tangent Edges Removed.

How do you make a tangent plane in Solidworks?

When you click on a non planar face using the reference geometry>plane option, you can create a tangent plane. This tangent plane will be placed arbitrarily until a second reference is selected. By using a sketch point, these planes can be easily positioned in the desired orientation.

Where is the line format toolbar in Solidworks?

If you’re going to be making a lot of changes, it may be convenient to enable the Line Format toolbar by clicking on View > Toolbars > Line Format. You’ll not only have access to the tools mentioned above but layers as well.