## How do you find the midpoint in Solidworks?

Dimensioning to Midpoints

- Click Smart Dimension. on the Dimensions/Relations toolbar, or click Tools > Dimensions > Smart.
- Right-click the edge whose midpoint you want to dimension, and click Select Midpoint.
- Select the second entity to dimension.
- Use rapid dimensioning to place evenly spaced dimensions.

## How do you find the midpoint of a line on shape?

First, select a line and a point. Next, click the Midpoint sketch tool on the sketch toolbar. The point will be constrained to the midpoint of the line. You can also select an arc and a point, and then click the Midpoint sketch tool on the sketch toolbar, and the point will be constrained to the midpoint of the arc.

## How do you move the endpoint of a line in Solidworks?

To change the length of the line, select one of the endpoints and drag to lengthen or shorten the line. To move the line, select the line and drag the line to another position. To change the angle of a line, select an endpoint and drag to a different angle.

## How do you translate a line in Solidworks?

Moving Sketches

- In an active sketch, click Modify Sketch. (Sketch toolbar) or Tools > Sketch Tools > Modify.
- In the dialog box: To move the sketch geometry incrementally, under Translate, type a value for X value and Y value and press Enter. …
- Click Close.

## What is dynamic highlight in Solidworks?

Items in the graphics area are highlighted when you select them, or dynamically highlighted when you move the pointer over them.

## How do you center an Onshape?

Hold the ALT key while sketching to constrain two rectangle sides to be equal (resulting in a square). To create a rectangular sketch from the center point outward, select the center point rectangle tool, then click the center point of the rectangle and the corner point of the rectangle.

## Where can you find the centerline and midpoint line tools in Solidworks?

Click Midpoint Line (Sketch toolbar) or Tools > Sketch Entities > Midpoint Line. Search ‘Midpoint Line’ in the SOLIDWORKS Knowledge Base.

## How do you end a line in Solidworks?

Complete the line in one of the following ways:

- Drag the pointer to the end of the line and release.
- Release the pointer, move the pointer to the end of the line, and click again.

## How do you switch between arc and line in Solidworks?

To autotransition between line and arc:

- Click Line. (Sketch toolbar) or click Tools > Sketch Entities > Line and sketch a line.
- Click the endpoint of the line, then move the pointer away. …
- Move the pointer back to the endpoint, then away again. …
- Click to place the arc.
- Move the pointer away from the arc endpoint.

## How do I change a line to a construction line in Solidworks?

Converting Sketch Entities in a Drawing to Construction Geometry

- Click Construction Geometry. on the Sketch toolbar.
- Click Tools > Sketch Tools > Construction Geometry.
- Select the For construction check box in the PropertyManager.
- Right-click any selected sketch entity and select Construction Geometry.

## How do I show a construction line in Solidworks?

on the Sketch toolbar. Click Tools > Sketch Tools > Construction Geometry. Select the For construction check box in the PropertyManager.

## How do you move lines in Solidworks?

Click the line or text and press the Delete key. To move: Click the line or text and drag to a new location. (Annotation toolbar), or click Insert > Annotations > Note.