Frequent question: How do I use the TRIM command in SolidWorks?

What is the function of trim entities in Solidworks?

The Trim Entities tool is mainly used for removing unwanted parts or portions from your design sketch. For trimming, you must have coincident sketch parts with another. The Sketch Trim Entities also consist of “Extend Entities” tool, which helps to extend or adjusting the lines.

How do you cut a line in Solidworks?

To cut a feature:

1. Edit a sketch.
2. Select the sketch entities required for the feature. …
3. Hold Ctrl and select a face to be the starting point for the cut.
4. Click Convert to Cut (2D to 3D toolbar), or click Tools > Sketch Tools > 2D to 3D > Cut, and click in the graphics area to establish the direction of the cut.

How do you trim a 3D object in Solidworks?

To trim a 3D sketch:

1. Start the 3D sketch on a 2D plane.
2. Then do either of the following: Right-click and select 3D sketch on a plane. Double-click a plane or sketch entity. You can use any of the following trim options: Power trim. Corner. Trim away inside. Trim away outside. Trim to closest.

What is the use of trim entities *?

Extends or trims two sketch entities until they intersect at a virtual corner. Trims open sketch entities that lie inside two bounding entities. Trims open sketch entities outside of two bounding entities. You can use the Trim PropertyManager to select a trim type and control other trimming options.

How do you trim outside in Solidworks?

Trimming with Trim Away Outside

1. Right-click the sketch and select Edit Sketch.
2. Click Trim Entities. (Sketch toolbar) or Tools > Sketch Tools > Trim.
3. In the PropertyManager, under Options, select Trim away outside .
4. Select two bounding sketch entities.
5. Select the sketch entities to trim.
6. Click . Video: Trim Away Outside.

How do you trim a half circle in SolidWorks?

Select trim tool and click on “trim to closest”. Than click on the left or right side of the circle (directly to the line) to get a half circle. Click on the green button on the top right to confirm trimming.

How do you cut out a circle in SolidWorks?

Trim Away Outside

1. Right-click the sketch and select Edit Sketch.
2. Click Trim Entities on the Sketch toolbar, or click Tools, Sketch Tools, Trim.
3. In the PropertyManager, under Options, select Trim away outside .
4. Select two bounding sketch entities.
5. Select the sketch entities to trim.
6. Click OK .

How do you cut a circle in SolidWorks?

You can create circular patterns symmetrically or asymmetrically in both directions from the seed geometry.
…
To create a circular pattern:

1. Create one or more features to replicate.
2. Click Circular Pattern (Features toolbar) or Insert > Pattern/Mirror > Circular Pattern.
3. Set the PropertyManager options.
4. Click .

How do I trim a solid part in Solidworks?

Surface Cut

1. Edit the solid body: In the FeatureManager design tree, click the solid body and click Edit Part. …
2. Click Cut With Surface on the Features toolbar, or click Insert > Cut > With Surface.
3. In the PropertyManager, under Surface Cut Parameters, select the surface or plane to use to cut the solid bodies.

How do you cut intersecting parts in Solidworks?

Intersecting Bodies to Modify Part Geometry

1. With the part open, click Insert > Features > Intersect .
2. For Solids, Surfaces, or Planes, select the bodies to intersect or merge.
3. Select Cap planar openings on surfaces to cap flat openings in surfaces.
4. Click Intersect. …
5. Select regions to exclude. …
6. Select options as required:

How do you cut a part in assembly in Solidworks?

1 Answer

1. In the assembly, click Edit Component for the part to be cut.
2. Insert – Feature – Cavity.
3. Select the part that you wish to do the cutting with.
4. Hide the cutting tool if necessary. You can’t suppress or delete it, as the cavity feature is referencing it.

How do you join two lines in Solidworks?

To combine two split sketch entities into one: In an open sketch, click the split point and press Delete. Search ‘Combining Split Entities’ in the SOLIDWORKS Knowledge Base.

How do you link lines in Solidworks?

You can apply connection lines automatically when you add center marks to a drawing view at the time of creation. In a drawing, click Tools > Options > Document Properties > Detailing , and under Auto insert on view creation, select Connection lines to hole patterns with center marks.

How do you offset entities in Solidworks?

In an open sketch, select one or more sketch entities, a model face, or a model edge. (Sketch toolbar) or Tools > Sketch Tools > Offset Entities. Set the properties in the Offset Entities PropertyManager. When you click in the graphics area, the offset entity is complete.