Frequent question: How do I Section A model in Catia?

How do I cut models in Catia?

For this:

1. Select Tools > Options from the menu bar. The Options dialog box is displayed.
2. Expand the Digital Mockup category from the left-hand tree.
3. Select DMU Optimizer item to display the corresponding tab. …
4. Select the 3D Cut option: it is automatically activated as an alternate shape.

How do you split an object in Catia?

CATPart document.

1. Click Split . The Split Definition dialog box is displayed.
2. Select Surface. 1 as the splitting surface. This surface intersects only one pad. …
3. Click OK . Material has been removed, but only one pad is split. The other one is unchanged because the surface did not intersect it.

How do I cut an assembly in Catia?

Reusing Assembly Design Splits

In this case, you just need to select the existing assembly split, click the Assembly Split icon and then select a face. Only the Assembly Features Definition dialog box appears to let you determine the parts of interest.

How do I cut in Catia v5?

Cutting the Part by the Sketch Plane

1. Double-click Sketch. 2 from the geometry. …
2. Move the sketch so that you can see the whole part.
3. Click Cut Part by Sketch Plane from the Visualization toolbar.

How do you cut materials in Catia?

You can remove material using split and trim command. Split simply cuts the material and trim is the combination of trim and join. If you want to trim, join and give fillet to material, use shape fillet command.

What is the use of cut part by sketch plane in Catia?

It is utilized to hide the strong bit, which appears in front of sketch and incapacitates us to work easily.

What is split and trim in Catia?

The main difference between these two commands is that Split is only cutting specific surfaces while Trim will cut all surfaces involved in the operation.

How do I use dynamic sectioning in Catia?

To create a section plane, you need to click Dynamic Sectioning in the Dynamic Sectioning toolbar. The section plane is automatically displayed. The center of the plane is located at the origin of the local axis system relative to the part. A section plane has limits and its own local axis system.

How do I get the space analysis toolbar in Catia?

Procedure:

1. Go to Tools -> Customize,
2. Select the Tool-bars tab.
3. Select New..,
4. select Assembly Design workbench (left window),
5. and select Space Analysis (right window).