Frequent question: How do I add a contact force in Solidworks?

How do you add forces in Solidworks?

To apply a force:

1. Click Add a force. The Force PropertyManager appears.
2. In the graphics area, select the desired faces.
3. Select: Normal to apply the force in the direction normal to each selected face. …
4. Select the force units first, then enter the force value. …
5. Click . …
6. Click Next.

How do you add a force to a motion analysis in Solidworks?

From an assembly, click Force (MotionManager toolbar). You must add in SOLIDWORKS Motion before adding a force to a motion study.

…

Force Function.

How do you show forces in Solidworks?

To list reaction forces, after running the analysis, right-click Results and select List Result Force. In the PropertyManager, under Options select Reaction force. You can also click Results Advisor > List Result Force (Simulation CommandManager).

How do I add a Simulation tab in Solidworks?

To activate SOLIDWORKS add-ins:

1. Click the SOLIDWORKS Add-Ins tab of the CommandManager.
2. Select the add-in to load or unload. The additional functionality appears throughout the product user interface. The SOLIDWORKS Add-Ins tab contains some commands for the ScanTo3D and Toolbox add-ins.

How do you simulate movements in Solidworks?

To start a motion study in SOLIDWORKS you can click on “Motion Study 1” tab on the lower left corner of SOLIDWORKS user interface. Make sure to click on “Expand Motion Manager” to display the SOLIDWORKS Motion Manager timeline view. The first thing you need to do is to select the type of simulation you want to perform.

How do I add a motor in Solidworks?

To use a motor in a motion study:

1. Create or edit the motion study.
2. Click Motor (MotionManager toolbar).
3. Edit the properties in the Motor PropertyManager.

How do you simulate in Solidworks?

1 Click Tools, Add-Ins. The Add-Ins dialog box appears. 2 Check the checkboxes next to SolidWorks Simulation. If SolidWorks Simulation is not in the list, you need to install SolidWorks Simulation.

What is a contact set in SolidWorks?

Use this PropertyManager to define interaction between solids, shells, and beams in a mixed mesh. Bonding beams to shells or solid faces is done automatically for touching components.

How do you simulation an assembly in SolidWorks?

How to Use Solidworks Static Simulation in an Assembly

1. After the Add-Ins window is open, check the boxes shown below to activate the Simulation and then click OK to apply.
2. Once the simulation is active move to the Simulation tab and click on New Study.
3. Choose the Static simulation and then click OK (tick).

What is free body force in Solidworks?

The free body forces can come from contact, external loads, restraints, or connectors. List Free Body Forces is available for static and nonlinear studies. For a static study, on the Static > Options tab, select Compute free body forces.

What are reaction forces?

A reaction force is a force that acts in the opposite direction to an action force. Friction is the reaction force resulting from surface interaction and adhesion during sliding. Reaction forces and reaction moment are usually the result of the actions of applied forces.

How do you do a stress analysis in Solidworks assembly?

To set up stress analysis on one or more components:

1. Click Simulation Setup (MotionManager toolbar).
2. In the graphics area, select a component on which to perform the stress analysis. …
3. Enter the Start Time and End Time for the analysis. …
4. Click Add Time. …
5. Repeat Steps 3 – 4 to compute stress analysis on other time intervals.