Frequent question: Can you Auto dimension in Solidworks?

How do I Auto Arrange dimensions in SOLIDWORKS?

To use Auto Arrange Dimensions:

1. Box select the dimensions.
2. Move the pointer over the dimension palette rollover button to display the dimension palette.
3. Click Auto Arrange Dimensions .

How do you add auto size in SOLIDWORKS?

Click Options (Features toolbar) or Insert > FeatureWorks > Options . Click Dimensions/Relations and select Enable Auto Dimensioning of Sketches and Add constraints to sketch. Click OK.

How do you add a smart dimension in SOLIDWORKS?

To add a dimension to a sketch or drawing:

1. Click Smart Dimension. on the Dimensions/Relations toolbar, or click Tools > Dimensions > Smart. …
2. Select the items to dimension, as shown in the table below. You can undo previous selections by pressing Esc. …
3. Click to place the dimension. To dimension the…

How do you control dimensions in SOLIDWORKS?

To control dimensions with the context toolbar:

1. Create a sketch with two lines.
2. Ctrl + select two lines.
3. On the context toolbar, click Make Parallel .
4. Ctrl + select the two lines and select Auto Insert Dimension on the context toolbar.
5. In the Modify dialog box, type a dimension.
6. Click .

How do I change dimension size in Solidworks?

To change a dimension: Double-click a dimension. The Modify dialog box appears. Change the dimension value with the arrows, thumbwheel , mouse wheel, or by typing in the dimension box.

How do you write Dimensions in Solidworks?

Start drawing a sketch; Use click-move-click approach to draw the sketch entity. Enter the required dimension in the highlighted box, then press Enter. If more dimension is needed (such as drawing a rectangle) enter dimension and press Enter until the sketch is done.

How do you add a dimension to a Solidworks 3D object?

Double-click one 3D sketch plane to make it active. Right-click on the edge of the 3D sketch plane to which you want to dimension, and select Smart Dimension. With the second plane selected, click inside the active plane to add the dimension.

How do I use DimXpert in Solidworks?

To use DimXpert for parts:

1. Open a part to dimension using DimXpert.
2. Set the DimXpert options. Click Tools > Options > Document Properties, and set the various DimXpert options, such as Geometric Tolerance.
3. Insert dimensions and geometric tolerances manually or automatically. Option. Description. …
4. Save the part.

How do I create a angular dimension in Solidworks?

Creating Angular Dimensions Between Two Lines

1. In an open sketch, click Smart Dimension. (Dimensions/Relations toolbar) or Tools > Dimensions > Smart.
2. Click one line.
3. Click the second line.
4. Move the pointer to show the angular dimension preview.
5. Set the value in the Modify box and click .
6. Click to place the dimension.

What is smart dimension in Solidworks?

Every user of SOLIDWORKS is familiar with the Smart Dimension tool with which they can dimension both 2D and 3D sketches – where the type of dimension produced will be determined by the sketch entities selected.

How do you turn off rapid dimension in Solidworks?

To disable the rapid dimension selector, in the Dimension PropertyManager, under Dimension Assist Tools, clear Rapid dimensioning. This setting persists across sessions. When the rapid dimension selector is enabled, you can dismiss it by pressing ESC. Pressing ESC again dismisses the Smart Dimension tool.

How do I round a dimension in Solidworks?

Click Tools > Options > Document Properties > Dimensions . In the Dimensions node and in any of the nodes under Dimensions, click Tolerance. In the Dimension Tolerance dialog box, under Dual dimension tolerance, select Inward rounding of secondary unit tolerance extents.

Why are dimensions GREY in Solidworks?

Inserted dimensions are black and non inserted dimensions are grey, by default. These colors carry over to printouts while in Color Display Mode is on. When this mode is turned off, all colors are shown as system status (system defines the color based on their status instead of other settings).

How do I make dimensions red in Solidworks?

You can change the appearance of dimensions in parts and sketches. You can specify colors for various types of dimensions in Tools > Options > System Options > Colors and specify Add parentheses by default in Tools > Options > Document Properties > Dimensions .