You asked: How do you extrude a shape in Solidworks?

How do you extrude shapes on shapes?

Use Extrude to create parts or surfaces.



From the Sketch or Feature toolbar:

  1. Click .
  2. Select Solid Creation type. …
  3. Select a Result operation type: …
  4. Select Faces and sketch regions to extrude.
  5. Select End type: …
  6. Specify whether to switch to the opposite direction, optional, .

How do you extrude a curve in Solidworks?

To extrude a surface:

  1. Sketch the profile of the surface.
  2. Click Extruded Surface (Surfaces toolbar) or Insert > Surface > Extrude.
  3. Set the PropertyManager options. Extruded surface using Mid Plane from sketched spline.
  4. Click OK . Resulting extruded surface.

What is extrude command in Solidworks?

Using the SOLIDWORKS Surface Extrude feature, we can extrude the boundary edges of a face of a solid body or edges of a surface body in a customized direction. When we run the Extruded Surface command, two things can happen: Either a sketch is active or preselected or no sketches exists.

How do you extrude a circle in Solidworks?

To create an assembly feature cut:

  1. Open a sketch on a face or plane, and sketch a profile of the cut. …
  2. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve.
  3. Set the options as needed in the Cut-Extrude or Cut-Revolve PropertyManager.
IT IS INTERESTING:  Question: How do I save a Revit backup?

How do you extrude a sphere in Solidworks?

Creating a Solid Sphere

  1. Create a new sketch.
  2. Draw a circle with a line intersecting it directly through the centre point.
  3. Trim one side of the circle away, leaving the central sketch line as solid.
  4. Create a Revolve Boss/Base.
  5. Direction Angle should be set to 360°
  6. Accept the feature.

What is extruded boss in SolidWorks?

The Boss-Extrude/Base feature will project a 3D model with the selected sketch or face. Figure 3: Selecting a Plane. Using the 2D sketch or plane to create a 3D model, the Boss-Extrude feature button will prompt you to set parameters in the menu shown in Figure 4.

How do you cut extrude?

Creating Extruded or Revolved Cuts as Assembly Features

  1. Open a sketch on a face or plane, and sketch a profile of the cut. …
  2. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve.
  3. Set the options as needed in the Extrude or Revolve PropertyManager.

Can you extrude a surface in SolidWorks?

You can select either a surface or the face of a solid body. You can also preselect the 3D faces to extrude before clicking Insert > Surface > Extrude. Select other faces to define the extrude as required.

How do you edit extrude in SolidWorks?

If you enter the wrong distance to extrude to: and exit the boss-extrude dialog without correcting it, go to the design tree, right-click on the extrude name, and find the “edit feature” button in the box of options that appears above the mouse. The dialog will reopen and you can edit the properties of the extrude.

IT IS INTERESTING:  Best answer: How do you use model items in Solidworks?
Special Project