You asked: How do I use the shell in Catia V5?

How do I draft in CATIA V5?

Tutorial to use drafting workbench in Catia V5.

  1. Open the model for which drafting is to be performed.
  2. Switch to drafting workbench.
  3. A new drawing wizard opens up. …
  4. Window->tile vertically.
  5. You will get a view as shown.
  6. Click on front view from the menu.
  7. Or get it from. …
  8. Click on the face as shown.

What are the commands in CATIA V5?

Let’s see how each of these command are used.

  • PAD command.
  • POCKET command.
  • SHAFT command.
  • GROOVE command.
  • RIB command.
  • SLOT command.

How do I create a solid body in CATIA V5?

How to convert enclosed surface to solid in CATIA?

  1. First of all join all the surfaces to which the solid has to be created.
  2. Go to Partdesign workbench.
  3. Select the surface and select the closed surface from the Surface based features.
  4. Then click on the ok button.
  5. Hide the surface to see the solid part.

How do I use draft in Catia?

Basic Draft

  1. Click the Draft Angle icon . …
  2. Check the Selection by neutral face option to determine the selection mode.
  3. Select the upper face as the neutral element. …
  4. The default angle value is 5. …
  5. Click Preview to see the draft to be created. …
  6. Click the More button to access additional options.
IT IS INTERESTING:  Best answer: How do I run an AutoLISP program in AutoCAD?

How do I open sketch tools in CATIA?

In CATIA, a sketch is drawn in the Sketcher workbench. To invoke the Sketcher workbench, choose the down arrow available on the right of the Sketcher button in the Sketcher toolbar; a flyout appears.

How do you make a shaft in CATIA?

Open the Revolution. CATPart document and make sure that PartBody is set as current. Select Sketch.



An open profile (not even closed by the revolution axis) cannot be be used as the first feature in a body.

  1. Click Shaft . …
  2. Click OK to close the warning message and display the Shaft Definition dialog box.

Where is the trim tool in Catia?

Open the Trim1. CATPart document. Click Trim . The Trim Definition dialog box appears.

How do you use the Split tool in Catia?

CATPart document.

  1. Click Split . The Split Definition dialog box appears.
  2. Select the element to be split. You should make your selection by clicking on the portion that you want to keep after the split. …
  3. Select the cutting element. A preview of the split appears. …
  4. Click OK to split the element.

How do you fill a shell in Catia?

Creating Fill Surfaces

  1. Click Fill in the Surfaces toolbar. …
  2. Select curves or surface edges to form a closed boundary. …
  3. Select the Continuity type to specify it between any selected support surfaces and the fill surface.

How do I add toolbars to Catia v5?

Create a Toolbar



In CATIA, select Tools >> Customize, pick the Toolbars tab then pick the New… button. 2. Select the new toolbar from the list, then pick Add Commands to add the TcIC commands available from the list.

IT IS INTERESTING:  How do I use a DGN file in AutoCAD?

How do I extract a surface in Catia?

Extracting Geometry

  1. Click Extract . The Extract Definition dialog box is displayed. …
  2. Select an edge or the face of an element. The selected element is highlighted. …
  3. Choose the Propagation type: …
  4. Click Show parameters>> to display further options. …
  5. Click OK to extract the element.
Special Project