Where is the rebuild tool in Solidworks?

Where is the Rebuild button in Solidworks?

Click Rebuild (Standard toolbar) or Edit > Rebuild, or press Ctrl + B. Rebuilds only the features that changed since the last rebuild. To rebuild all features, press Ctrl + Q.

What is rebuild in Solidworks?

After you make changes in a model, you rebuild the model to update features and check for errors. Various tools are available to rebuild parts, assemblies, drawings, and sketches. Rebuilds changed features. Rebuilds changed features in all configurations.

How do you check rebuild time in Solidworks?

Click Rebuild (Standard toolbar) or Edit > Rebuild or press Ctrl+B. Reports the rebuild time for the total assembly. The report shows the time taken to rebuild significant components and features.

How do I fix a solidworks rebuild error?

To control the rebuild action:

1. Click Options (Standard toolbar) or Tools, Options.
2. Select Stop, Continue, or Prompt for When rebuild error occurs, then click OK.

How do I repair a sketch in Solidworks?

To open the Repair Sketch tool: Click Tools > Sketch Tools > Repair Sketch. Repair Sketch deletes these from the sketch. Repair Sketch merges these into a single entity.

How do I stop a solidworks rebuild?

Click Tools > Options > System Options > Assemblies and under When Large Assembly Mode is active, select Suspend automatic rebuild.

What does Ctrl Q Do in Solidworks?

Ctrl+Q is a full or force rebuild. This rebuilds all features starting at the top of the feature tree and working down. Rebuilding everything in history order allows everything to work out how they should look and to do so before any features that rely on them do the same thing.

How do I find a circular reference in Solidworks?

In your assembly, simply go to your Command Manager, click on the Evaluate tab, then the Performance Evaluation. Alternately, you could use the dropdown menu and go to Tools > Evaluate > Performance Evaluation.

How do I turn on quick snaps in Solidworks?

You can enable Quick Snaps, regardless of whether Enable snapping or the Sketch Snap is selected under Options > System Options > Relations/Snaps . Double-click Quick Snaps on the toolbar to retain the snap capability for multiple instances of the same sketch entity, or until you select different Quick Snaps.

What section of the assembly performance evaluation dialog box includes information about in context relationship conflicts?

AssemblyXpert – In-Context Relationship Conflicts

To list the components with conflicts: Click Analyze and Fix in AssemblyXpert. In the dialog box, you can: Select a component and click Fix It.

How do I run a repair in Solidworks?

Repairing an Installation

1. Open the Windows Control Panel and click Programs and Features.
2. Select the SOLIDWORKS version that you want to repair and click Change.
3. On the Welcome to SOLIDWORKS Installation Manager screen, click Repair your installation.
4. On the Products to Repair screen, select the product to repair.

What does Cannot locate end of feature solidworks?

You may get an error which says “Cannot locate end of the feature.” This results because the extrude direction is incorrect. If that’s the case, click the “switch direction” button next to the end condition menu (it looks like two parallel, opposing arrows) and Solidworks will reverse the extrusion direction.

How do I edit a sketch plane in Solidworks?

Select the sketch in the FeatureManager design tree, and click Edit, Sketch Plane. Right-click the sketch in the FeatureManager design tree, and select Edit Sketch Plane . Select a new plane in the FeatureManager design tree or select a new planar face in the model for Sketch Plane/Face . Click OK .