What is snap in Catia v5?

What is snap CATIA?

The Simple Snap applies the minimal transformation when moving a geometrical element of a component onto another geometrical element belonging to the same or to a different component.

How do you turn off Snap on CATIA?

As for the textbox, the snap to grid option can be turned off by hitting shift. Alternatively you can disable it at option>mechanical design>drafting. Click on the “annotation and Dress-up” tab and unclick snap by default to disable it permanently.

How do I use smart move in CATIA V5?

Click the Smart Move icon and expand the Smart Move dialog box, including the viewer that appears.

1. The Viewer frame: this window appears only if you pre-select the components affected to perform the smart move. …
2. The Automatic constraint creation option allows you to create constraints to keep the move operation.

What is Sketcher workbench in CATIA?

The Sketcher Workbench is utilized to make 2D geometries planned for use in the Part Design Workbench and different workbenches.

How do you make a grid on CATIA?

Using the Sketcher Grid

1. To display the Grid in the Sketcher session, just click Grid in the Sketch tools toolbar. The grid is displayed. …
2. Select Tools > Options … …
3. Select the Mechanical Design category in the left-hand box.
4. Select the Sketcher sub-category. …
5. Set the options according to your needs:

How do I change grid size in CATIA?

To change the size of the reference planes in CATIA, go to Tools menu > Options. In the Options dialog box under Infrastructure > Part Infrastructure, click on the Display tab. Under Display in Geometry Area the size of the planes is controlled by the scroll bar next to the Axis system display size (in mm) field.

What is smart move in Catia?

The Smart Move command combines the Manipulate and Snap capabilities. Optionally, it creates constraints. This task illustrates how to move a component and create a coincidence constraint between two axes.

How do you drag in Catia?

Press and hold down Ctrl and drag the fillet to another edge on the part. As soon as you point to the pad’s face, the face is highlighted and the pointer changes to this shape: . Release Ctrl and the mouse button.

How do you move parts in Catia v5?

You can select lines, points, axis and planes. Open the ProductForReset. CATProduct document. Click the Translation or Rotation icon .

…

About the Move parameters

1. Product 1: Yellow.
2. Product 2: Red.
3. Product 3: Green.
4. Product 4: Blue.
5. Product 5: Purple.