What is a multi body part in Solidworks?

What is a multi body part?

A multibody part consists of multiple solid bodies that are not dynamic. If you need to represent dynamic motion among bodies, use an assembly. Tools such as Move Component, Dynamic Clearance, and Collision Detection are available only with assembly documents.

How do you make a multi body in Solidworks?

Saving an Assembly as a Multibody Part

  1. Open an assembly document.
  2. Click File > Save As. The Save As dialog box appears.
  3. Set the Save as type to Part (*. prt, *. …
  4. Select one of the following: Exterior Faces to save the exterior faces as Surface Bodies . …
  5. Select or clear the following: …
  6. Click Save.

What is a Solidworks body?

A multibody part occurs within SOLIDWORKS when there is more than one continuous solid inside a single part file. A multibody part can be used as an intermediate step towards a single body or an as alternative to an assembly. While multibody parts should not replace assemblies, they can be a useful alternative.

How do you add multiple parts to a Solidworks drawing?

Under Part/Assembly to Insert, do one of the following:

  1. Ctrl + select several components from the list.
  2. Click Browse. In the dialog box, Ctrl + select several components and then click Open.
IT IS INTERESTING:  How do I create a plumbing plan in AutoCAD?

How do I convert assembly to Solidworks?

To save a part as an assembly and create instance counts from similar bodies:

  1. Click Insert > Features > Save Bodies.
  2. In the Save Bodies PropertyManager, under Create Assembly, select Derive resulting parts from similar bodies or cut list.

How do I add a part to a part in Solidworks?

With a part document open, click Insert Part (Features toolbar) or Insert > Part. Browse to a part document and click Open. The Insert Part PropertyManager appears. Under Transfer, select any combination of items from the inserted part to be included in the derived part.

What is external reference in Solidworks?

An external reference is created when one document is dependent on another document for its solution. If the referenced document changes, the dependent document changes also. In an assembly, you can create an in-context feature on one component that references the geometry of another component.

How do you create a part in Solidworks 2020?

Creating Parts

  1. In the Design Library task pane, under Toolbox , expand the standard, category, and type of the component. Images and descriptions of available components appear in the task pane.
  2. Right-click the component and click Create Part.
  3. In the PropertyManager, under Properties, specify property values. …
  4. Click .

How do you isolate a body in Solidworks?

To isolate bodies:

  1. Select the bodies to isolate.
  2. Click View > Display > Isolate or right-click and select Isolate.
  3. On the Isolate pop-up toolbar, you can click one of the following to change the Visibility of Removed Bodies: Transparent. …
  4. When you are done working on the isolated bodies, click Exit Isolate.
IT IS INTERESTING:  How do you activate Sheet Metal tabs in Solidworks?

How do you use solid bodies in SOLIDWORKS?

Grouping Bodies into Folders

  1. Expand Solid Bodies in the FeatureManager design tree.
  2. Right-click a solid body name, select Add to New Folder, and name the folder. The selected solid body is listed in the new folder. You can drag other bodies into the same folder, and create other new folders and subfolders.

How do you Translate a body in SOLIDWORKS?

Click Move/Copy Bodies (Features toolbar) or Insert > Features > Move/Copy. Specify parameters to move, copy, or rotate bodies. Apply mates between bodies. Click Translate/Rotate or Constraints at the bottom of the PropertyManager (if necessary) to switch to the page you want.

How do you make a body pattern in SOLIDWORKS?

Some bodies and a single direction selected. To create a pattern of patterns: Click a pattern tool (Features toolbar) or Insert > Pattern/Mirror and select a pattern tool (linear, circular, or curve driven pattern). You can also use a pattern you created using X-Y coordinates (table pattern) or sketch points.

Special Project