What is a flange solidworks?

How do you flange in Solidworks?

To create a base flange:

1. Create a single open, single closed, or multiple contained closed sketch. …
2. Click Base Flange/Tab on the Sheet Metal toolbar, or click Insert > Sheet Metal > Base Flange. …
3. Set options in the PropertyManager and click .

What is edge flange in Solidworks?

You can add edge flanges to one or more edges. General edge flange characteristics include: Thickness is linked to the thickness of the sheet metal part. Sketch line of the profile must lie on the selected edge.

What is Miter flange in Solidworks?

A miter flange feature adds a series of flanges to one or more edges of a sheet metal part. The sketch for a miter flange must adhere to the following requirements: The sketch can contain lines or arcs. If you use an arc to create a miter flange, the arc cannot be tangent to the thickness edge.

What is a flange used for?

Flanges are helpful to connect pumps, valves, pipes, and other parts to form a piping system. Flanges are typically welded or thread screwed to connect. The use of flanges allows a person for maintenance and easy repair of the pipe system.

What is a base flange?

A base flange is the first feature in a new sheet metal part. When you add a base flange feature to a SOLIDWORKS part, the part is marked as a sheet metal part. Bends are added wherever appropriate, and sheet metal specific features are added to the FeatureManager design tree.

How do I add edge flange to Solidworks?

Adding Edge Flanges

1. In an open sheet metal part, click Edge Flange. (Sheet Metal toolbar) or Insert > Sheet Metal > Edge Flange.
2. In the graphics area, select one or more edges for Edge . There are specific requirements for adding edge flanges to curved edges. …
3. Set options in the Edge-Flange PropertyManager and click .

What is sheet metal flange?

A flange feature consists of a face and bend connected to an existing face along a straight edge. To add a flange feature, you select one or more edges, and specify the size and position of the material added.

How do you use a swept flange?

Creating Swept Flanges

1. Sketch an open, non-intersecting profile on a plane or face.
2. Create a path for the profile to follow. You can use a sketch or a series of existing sheet metal edges. …
3. Click Swept Flange. …
4. In the graphics area: …
5. Set options in the PropertyManager, then click .

How do you use sheet metal in Solidworks?

To do this we simply need to right-click any tab on the CommandManager and select Sheet Metal from the drop down menu. Next, we will activate the Sheet Metal tab of the Command Manager and click Base Flange/Tab tool, which should be the first tool on the right not grayed out when beginning a part.

How do you close a corner in Solidworks?

Click Closed Corner (Sheet Metal toolbar) or Insert > Sheet Metal > Closed Corner. Select one or more planar faces for Faces to Extend . The SOLIDWORKS software attempts to find the Faces to Match . If matching faces are not found, you can manually select the Faces to Extend and Faces to Match.