Quick Answer: Where is the Flex tool in Solidworks?

What is Flex command in SolidWorks?

The flex feature calculates the extents of the part using a bounding box. The trim planes are then initially located at the extents of the bodies, perpendicular to the Z-axis of the triad. The flex feature affects the region between the trim planes only.

How do you change the bend axis flex in Solidworks?

Example of Flex Bending

1. Move the pointer over the triad arrows to display the drag/rotate pointer. . …
2. Move the pointer over the trim plane manipulators to display the move pointer . …
3. Move the pointer over the edge of the trim planes to display the bending pointer .
4. Drag the trim planes to bend and modify the flex feature.

How do I use the Deform tool in Solidworks?

To open the Deform PropertyManager with Surface Push options:

1. Click Deform. on the Features toolbar, or click Insert > Features > Deform.
2. In the PropertyManager, under Deform Type, select Surface Push.

How do I use the wrap feature in Solidworks?

Wrap

1. Select the sketch you want to wrap from the FeatureManager design tree. …
2. Click Wrap on the Features toolbar, or click Insert > Features > Wrap.
3. In the PropertyManager, under Wrap Type: …
4. If you select Emboss or Deboss , you can select a line, linear edge, or plane to set a Pull Direction . …
5. Click OK .

Can you bend in Solidworks?

SOLIDWORKS Flex Feature for bending, stretching, tapering, and twisting your parts.

How do you insert a flexible cable in Solidworks?

Creating Flexible Ribbon Cable Routes

1. Insert the first ribbon cable connector into the assembly. …
2. Insert the second ribbon cable connector, and, optionally, ribbon cable clips.
3. In the Auto Route PropertyManager, under Routing Mode, select Auto-Route.
4. Under Auto Route, select Flexible.
5. Define the path of the cable:

What is flexible assembly in Solidworks?

By default, when you create a subassembly, it is rigid. Within the parent assembly, the subassembly acts as a single unit and its components do not move relative to each other. However, you can make subassemblies flexible. This allows movement of the individual components of a subassembly within the parent assembly.

How do I stretch in SolidWorks?

Stretching Sketch Entities

1. Click Base point. and then click on the sketch to set a base point.
2. Drag to stretch the sketch entities. When you release, the entities stretch to that point and the PropertyManager closes.

How do you make a spring flexible in SolidWorks?

Click . In the FeatureManager design tree, right-click Spring<1> and click Make Part Flexible in the context menu.

How do you bend extruded parts in SolidWorks?

Using Insert Bends to Add a Body

1. In a sheet metal part, select or create a plane and draw a profile sketch.
2. Click Extruded Boss/Base (Features toolbar).
3. In the PropertyManager: Set the direction and depth of the extrusion. …
4. Click Insert Bends. (Sheet Metal toolbar) or Insert > Sheet Metal > Bends .
5. In the PropertyManager: